Filter
Top Products
E-20
FACTORY PRESET OF MODE SETTINGS
● The default values (factory preset) for each of the RM-LP55’s modes are shown below.
Any setting data which is currently displayed on the LCD can be reset to the default value (shown in
the table above) by pressing the FUNC1 and buttons C or the FUNC2 and buttons D
simultaneously.
You can also simultaneously reset all settings to the default values as described in the next section.
System resetting method
● While pressing the MENU and buttons B
simultaneously, set the OPERATE switch to
ON.
● ASYSTEM RESETB appears on the display,
then the unit returns to its normal operating
state.
● System resetting does not affect scene files
(A and B) or current camera settings.
● AUTO IRIS LEVEL, ALC IRIS SET and
CAMERA TYPE settings cannot be reset by
the system resetting, (AREMOTE
CONTROLLER OPERATION MODE
SETTINGSB (A pg. 18)).
Mode Factory preset Mode Factory preset
CAM MODE CAM RANDOM TRIGGER OFF
CONTOUR ON HI-RESO OFF
CONTOUR LEVEL 0 SHUTTER NORMAL
SC COARSE 0°
V.SCAN
1/60.0 (U-ver.)
SC FINE 0 1/50.0 (E-ver.)
H.PHASE 0 SLOW 1 FRM
GAMMA ON GAIN MODE 0 dB
IRIS DETECT NORMAL WHITE BALANCE AUTO1
TITLE OFF PAINT OFF
TITLE POSITION 1 --
SYSTEM RESET
MENU
While pressing these
simultaneously, set
OPERATE to ON.
RM-LP55_U_E.book Page 20 Monday, July 25, 2005 2:57 PM