Filter
Top Products
E-16
OPERATION (continued)
o LENS IRIS CONTROL
● Operates the iris of the lens mounted on the
camera.
Auto iris
1. Press IRIS AUTO/MANU button M to set to the
auto iris mode (the IRIS MANU LED is not lit).
2. Set whether to adjust the auto iris level using
the IRIS control N at AAUTO IRIS LEVELB.
(AREMOTE CONTROLLER OPERATION
MODE SETTINGSB (A pg. 18))
● If the camera’s LENS switch is set to AMANUB,
the auto iris will not function.
Manual iris
1. Press IRIS AUTO/MANU button M and set to
the manual iris mode. (The IRIS MANU LED is
lit.)
2. Using IRIS control N, the iris level can be
controlled (between near CLOSE position and
OPEN position).
NOTE:
When Gain in set to AALC + EEIB or AALCB, or
when the shutter mode is set to AEEIB, the iris
mode is automatically set to auto iris. In this case,
manual iris operation is not possible.
When the above settings have been set, change the setting
at
ALC IRIS SET
to perform manual iris operation.
(A pg. 18, AREMOTE CONTROLLER
OPERATION MODE SETTINGSB)
o MASTER BLACK LEVEL CONTROL
● Controls the black level of the camera signal.
● Use the MASTER BLACK control O to adjust
the black level.
● Turn clockwise to increase the black level; turn
counterclockwise to decrease the level.
o SCENE FILE FUNCTION
● To store setting data in the Scene File (A/B) or
to call up data stored in the Scene File (A/B)
and apply it to the connected camera.
Writing data into Scene File
1. Press FILE button F.
● The AFILEB screen will appear on the LCD.
2. Press FUNC1 button C to select either
SCENE A or SCENE B.
3. Press FUNC2 button D to select AWRITEB.
4. Press ENTER/SET button E.
●
The LCD shows
A
SCENE FILE A (or B) WRITE OK?
B
5. Press ENTER/SET button E again if it’s OK.
●
The LCD changes to
A
SCENE FILE A (or B)
WRITING!
B
. The setting data is stored in memory.
● If you don’t want to execute writing. press
MENU button B to cancel.
FUNC1
W.BAL
MENU
FILE
ENTER
/SET
SHUTTER
FUNC2
GAIN
EBCD
F
IRIS
AUTO/MANU
B
IRIS
CLOSE OPEN
MASTER BLACK
WHITE PAINT
R
M
N
O
IRIS
AUTO/MANU
IRIS
CLOSE OPEN
Switch between auto
and manual.
Auto iris mode: serves as a precise auto iris level
control. Manual iris mode: serves as
an iris level control.
FILE
Press FILE button.
FILE
SCENE A WRITE
FUNC1
Select either the
ASCENE AB or ASCENE BB:
FUNC2
Set to AWRITEB.
SCENE FILE A
WRITE OK?
SCENE FILE A
WRITING!
RM-LP55_U_E.book Page 16 Monday, July 25, 2005 2:57 PM