Filter
Top Products
30
PROGRAM TIMER
( DAILY) START END MODE
1. – – – – – – – : – – – – : – –
– – H
2. – – – – – – – : – – – – : – –
– – H
3. – – – – – – – : – – – – : – –
– – H
4. – – – – – – – : – – – – : – –
– – H
5. – – – – – – – : – – – – : – –
– – H
6. – – – – – – – : – – – – : – –
– – H
7. – – – – – – – : – – – – : – –
– – H
8. – – – – – – – : – – – – : – –
– – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU) TO END
PROGRAM TIMER
(WEEKLY) START END MODE
( MON ) – – : – – – – : – –
– – H
( TUE ) – – : – – – – : – –
– – H
( WED ) – – : – – – – : – –
– – H
( THU) – – : – – – – : – –
– – H
( F RI ) – – : – – – – : – –
– – H
( SAT ) – – : – – – – : – –
– – H
( SUN ) – – : – – – – : – –
– – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU) TO END
PROGRAM TIMER
(WEEKLY) START END MODE
( MON ) – 8 : 3 0 1 9 : 3 0 12 H
( TUE ) – – : – – – – : – –
– – H
( WED ) – – : – – – – : – –
– – H
( THU ) – – : – – – – : – –
– – H
( F RI ) – – : – – – – : – –
– – H
( SAT ) – – : – – – – : – –
– – H
( SUN ) – – : – – – – : – –
– – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU) TO END
PROGRAM TIMER
(WEEKLY) START END MODE
( MON ) – 8 : 3 0 1 9 : 3 0 12 H
( TUE ) – 8 : 3 0 1 9 : 3 0 12 H
( WED ) – 8 : 3 0 1 7 : 3 0 – 3 H
( THU) – 8 : 3 0 1 9 : 3 0 – 3 H
(FRI ) – 8 : 3 0 2 2 : 3 0 2 4 H
( SAT ) 1 0 : 0 0 2 2 : 0 0 2 4 H
( SUN ) – – : – – – – : – –
– – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU) TO END
PROGRAM TIMER
(WEEKLY) START END MODE
( MON ) – – : – – – – : – –
– – H
( TUE ) – – : – – – – : – –
– – H
( WED ) – – : – – – – : – –
– – H
( THU ) – – : – – – – : – –
– – H
( F RI ) – – : – – – – : – –
– – H
( SAT ) – – : – – – – : – –
– – H
( SUN ) – – : – – – – : – –
– – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU) TO END
7-3 Timer Recording
Daily timer program setting screen
• Set the cursor arrow to the second
line <DAILY> and press the [SET +/-
] button.
Weekly timer program setting screen
Start time (hour)
Start time (minute)
Stop time (hour)
Stop time (minute)
Record mode
Blinking
Days of the
week
(Monday to
Sunday)
,
,
7 RECORDING
16.30.00
TIMER
Timer
VCR's display
Setting the weekly timer
You can program the VCR to record on a specified day
each week.
Ⅲ Using the same procedure as in daily timer program
setting, select <PROGRAM TIMER> in the main menu to
display the timer program setting screen on the monitor.
(Refer to steps 1 to 3 in daily timer programming.)
• When the timer program setting screen is displayed,
the daily timer program setting screen is shown first.
Display the weekly timer program setting screen.
(<WEEKLY> is shown on the second line.)
Ⅲ Press the [SHIFT +] or [SHIFT -] button to move the
cursor arrow to <DAILY> and press the [SET +] or
[SET -] button.
[
The weekly timer program setting screen is shown.
Select the day of the week you want to record on.
Press the [SHIFT +] or [SHIFT -] button to set the cursor
arrow to the day of the week to be set.
• Press the [SHIFT +] button to move the cursor arrow
down and the [SHIFT -] button to move it up.
Set the selected day of the week.
Press the [SET +] or [SET -] button.
[
The selected day of the week blinks.
• Press the [SET +] button. The start time (hour) blinks.
• Press the [SET -] button. The record mode blinks.
Set the timer.
Press the [SHIFT +] or [SHIFT -] button until the item
you want to set starts blinking.
• Press the [SHIFT +] button to shift the blinking to
the right.
"Start time (hour)"
[
"Start time (minute)"
[
"Stop time (hour)"
[
"Stop time (minute)"
[
"Record mode"
[
Select the next program No.
• Press the [SHIFT -] button to move the blinking to
the left.
Press the [SET +] or [SET -] button to set the value
for the blinking item.
• Press the [SET +] button to increase the value and
the [SHIFT -] button to decrease it.
Ⅲ Set the "Start time (hour)", "Start time (minute)", "Stop
time (hour)", "Stop time (minute)" and "Record mode"
with the [SHIFT +/-] and [SET +/-] buttons.
When all values are set, the set program No. is shown
on the VCR's display.
Accessing another day of the week.
• Select the "Record mode" (so that it is blinking) and
press the [SHIFT +] button. Or, select "Start time" (so
that it is blinking) and press the [SHIFT -] button.
[
The blinking part stops blinking. You may now select
another day of the week.
To set more than one weekly timer program, repeat
steps 2 to 5.
To end timer programming, press the [MENU] button twice.
[
The normal screen is restored.
ⅢPress the [TIMER REC] button.
[
The TIMER indication lights in the VCR's display.
Power is switched off automatically and the VCR
enters the Timer Record Standby mode.
31
COUNT/
CLOCK
TIME
MODE
TIMER
REC
AL/PL
RESET
MENU
SHIFT/TRACKING
SET/V.LOCK
RESET
/CANCEL
PAL
7-3 Timer Recording
7 RECORDING
[MENU] button
[SHIFT–] button
[SHIFT+] button
[TIMER REC] button
[SET–] button
[SET+] button
Changing a preset timer program
Press the [TIMER REC] button to turn off the TIMER
indication in the display.
Turn the VCR and the monitor on.
Press the [MENU] button to display the main menu
screen and select <PROGRAM TIMER> with the [SHIFT
+/-] button. Then, press the [SET +/-] button.
[
The timer program setting screen is displayed.
Press the [SHIFT +/-] button to move the cursor arrow to
the program No. or the day of the week to be changed.
Press the [SET +/-] button.
Select the item to be changed (so that it is blinking) with
the [SHIFT +/-] button.
Change the value with the [SHIFT +/-] button.
Press the [MENU] button twice.
[
The normal screen is restored.
Using the VCR in the Timer Record
Standby mode
Press the [TIMER REC] button to turn off the TIMER
indication for normal use.
Press the [TIMER REC] button again to turn on the TIMER
indication. The Timer Record Standby mode is engaged.
When all timer recording programs have been executed,
the TIMER indication goes off.
[RESET/CANCEL] button
Alarm input during timer recording
• If you wish to allow alarm input during timer recording,
turn the function menu switch <TIMER ALARM> to ON.
(Factory setting: ON)
• Turn the switch to OFF if you wish to prohibit alarm input.
Canceling timer programming
To stop timer programming
Press the [RESET/CANCEL] button.
The program being set is canceled.
Press the [MENU] button twice.
[
The normal screen mode is restored.
To cancel a preset timer program
Press the [TIMER REC] button to turn off the TIMER
indication in the display.
Turn the VCR and the monitor on.
Press the [MENU] button to display the main menu
screen and select <PROGRAM TIMER> with the [SHIFT
+/-] button. Then, press the [SET +/-] button.
[
The timer program setting screen is displayed.
Press the [SHIFT +/
–] button to move the cursor arrow
to the program No. or the day of the week to be
canceled.
Press the [RESET/CANCEL] button.
[
The specified timer program data is canceled.
Press the [MENU] button twice.
[
The normal screen is restored.