Filter
Top Products
Filename [DVM600US_08DV Operation.fm]
Masterpage:Left+
34 EN
BASIC OPERATIONS ON DV DECK
Page 34Monday, 25 September 2006 13:54
Variable Speed Search
During playback, press N for forward variable speed search, or
O for reverse variable speed search.
● Each press of the button increases the search speed for each
direction.
● To resume normal playback, press I.
Still Picture/Frame-By-Frame Playback
1 Press W to pause during playback.
2 Press W to activate frame-by-frame playback.
● To resume normal playback, press I.
Slow Motion
1 Press W to pause during playback.
2 Press and hold W for 2 seconds, then release. Press W and
release again to return to still picture.
● Press N for forward slow motion or O for reverse slow
motion.
● To resume normal playback, press I.
Skip Search
During playback, press v.
● Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
Instant Replay
During playback, press
w
on the remote control or
INSTANT REPLAY
on the unit. The unit rewinds the picture a little
(about 7 seconds) and resumes playback.
Next Function Memory
The Next Function Memory
A
tells
B
the unit what to do after rewinding.
Before continuing, make sure the unit is in the Stop mode.
For Automatic Start Of Playback
Press O, then press I within 2 seconds.
For Automatic Cassette Ejection After Tape Rewind
Press O, then press M (DV) within 2 seconds.
Soundtrack Selection
Your unit is capable of recording two soundtracks (L and R) and will
play back the one you select.
During Playback
Pressing AUDIO changes the soundtrack as follows:
To select the audio mode (SOUND1/SOUND2/MIX), refer to
AAUDIO MODEB under ADV SET UPB (A pg. 60).
Time Code
During recording, a time code is recorded on the tape. This time
code is used to confirm the position on the tape when playing back
or editing a tape.
1 Press DISPLAY on the remote control or the unit until the time
code on the tape appears on the front display panel and the TV
screen.
● Each time you press DISPLAY, the indication changes as
follows:
Time code N Tape remaining time N Clock time N (Back to the
beginning)
Playback Features
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Press DV/HDD/DVD on the unit repeatedly or DV on the
remote so that the DV lamp lights up on the unit.
ATTENTION:
In the search, still, slow-motion or frame-by-frame playback
mode, a slight mosaic effect appears on screen.
Reverse Search
3 steps
Reverse
Slow Motion
1 step
Slow Motion
1 step
Normal
Play
Forward Search
3 steps
–12 –4 –2 –1/5 1/5 1 2 4 12
W
DV
AUDIO
DISPLAY
I
N
O
DVDTV
N
Forward
Reverse
O
TRACK
USE
On-Screen Display
L WXR Both sounds on the left channel and
the right channel are mixed and played
back
L W Sound on the left channel is played
back
X R Sound on the right channel is played
back
DVM600US_00.book Page 34 Monday, September 25, 2006 1:54 PM