Filter
Top Products
Filename [DVM600US_12Subsidiary.fm]
Masterpage:Left0
58 EN
Page 58Monday, 25 September 2006 13:54
SUBSIDIARY SETTINGS
Various modes of this unit are categorized into menus nested in 2
levels shown in the following table. To change the settings of these
modes, find the desired mode in the menu (for details on each
menu, see pages 58 through 60), then follow the procedure below.
● The procedure below shows how to set the desired option of the
AJUMP TIMEB mode as an example.
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press selection keys to select AFUNCTION SET UPB, then
press G.
4 Press selection keys to select
AREC/PLAY SET UPB, then
press G.
5 Press selection keys to select
AJUMP TIMEB, then press
ENTER.
6 Press selection keys to select
the desired option, then press
ENTER.
7 Press SET UP to complete the setting.
*The boldface settings below indicate the settings at your purchase.
AUDIO OUTPUT
8 DIGITAL AUDIO OUT ^ DOLBY DIGITAL/PCM / STREAM/
PCM
/ PCM ONLY
Set to the appropriate mode according to the type of the device
connected to [DIGITAL AUDIO OUTPUT] connector.
DOLBY DIGITAL/PCM:
Select this when you connect the digital input connector of a
Dolby Digital Decoder or an amplifier with a built-in Dolby Digital
Decoder.
STREAM/PCM:
Select this when you connect the digital input connector of an
amplifier with a built-in DTS, Dolby Digital, or MPEG
multichannel decoder.
PCM ONLY:
Select this when you connect the linear PCM digital input of
other audio equipment (amplifier, MD or DAT deck, etc.).
NOTES:
● This setting also functions when HDD is active.
● If you watch or play back a title which contains multiple audio
languages, select APCM ONLYB in advance and choose main or
sub audio with AUDIO.
8 ANALOG AUDIO OUT ^ STEREO / DOLBY SURROUND
Select the appropriate setting to accommodate the unit to the
connected A/V equipment. This function takes effect when a
DVD VIDEO disc is played back.
STEREO:
Select this when listening to conventional two-channel stereo
audio with the unit’s [AUDIO OUTPUT] connectors connected
to a stereo amplifier/receiver or TV set, or in case you want to
record the audio from a DVDVIDEO disc to a Mini Disc, etc.
DOLBY SURROUND:
Select this when listening to multichannel surround audio with
the unit’s [AUDIO OUTPUT] connectors connected to an
amplifier/receiver with a built-in surround decoder or a surround
decoder.
8 D. RANGE CONTROL ^ NORMAL / WIDE RANGE / TV MODE
The dynamic range (the difference between the loudest sound and
the quietest one) can be compressed during playback of a program
encoded in Dolby Digital format.
This function takes effect when a DVDVIDEO disc recorded in
Dolby Digital format is played back at low or middle volume.
NORMAL:
Normally select this setting to activate this function.
WIDE RANGE:
Select this to deactivate this function when you enjoy wide
dynamic range program.
TV MODE:
Select this when you hear the sound through the TV’s
speaker(s).
NOTES:
● This function has no effect on programs other than those
recorded in Dolby Digital format.
● This function does not work when Simulated Surround Effect is
activated. (A pg. 29)
● The effect of ANORMALB and AWIDE RANGEB may not be
different depending on discs.
8 OUTPUT LEVEL ^ STANDARD / LOW
You can lower the output level of analog audio to accommodate the
unit to the connected A/V equipment.
STANDARD:
Normally select this setting.
LOW:
The output level of analog audio is lowered.
Mode Set
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
DVD VIDEO SET UP LANGUAGE SET (A pg. 20)
AUDIO OUTPUT (See right column)
DISC PLAY SET UP (A pg. 59)
HDD/DVD SET UP HDD SET UP (A pg. 59)
DVD SET UP (A pg. 59, 62)
DISC SET UP (A pg. 61, 62)
COMMON SET UP (A pg. 59)
FUNCTION SET UP REC/PLAY SET UP (A pg. 59)
DISPLAY SET (A pg. 59)
VIDEO IN/OUT (A pg. 21)
INITIAL SET UP MENU BACKGROUND (A pg. 64)
CLOCK SET (A pg. 19)
DV SET UP (A pg. 60)
FGDE
ENTER
AUDIO
SET UP
DVD
HDD
DVDTV
Selection Keys
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
XP MODE REC AUDIO
HDD/DVD SET UP
FUNCTION SET UP
INITIAL SET UP
REC/PLAY SET UP
DISPLAY SET
JUMP TIME
VIDEO IN/OUT
DOLBY DIGITAL
15 MIN
SELECT WITH @
PRESS [SET UP] TO EXIT
THEN PRESS [ENTER]
DVM600US_00.book Page 58 Monday, September 25, 2006 1:54 PM