JVC SR-DVM600U DVR User Manual


 
Masterpage:Right+
EN 37
Filename [DVM600US_09Live Memory.fm]
LIVE MEMORY PLAYBACK ON HDD/DVD DECK
Page 37Monday, 25 September 2006 13:54
Temporary recording for Live Memory (HDD deck only)
This unit automatically records the AV input being received, within
the specified range of time, to the reserved space on the hard disk.
The time range can be set for 30 minutes, 1 hour, and 3 hours.
(A pg. 59)
NOTE:
Previous temporary recordings will be overwritten since the unit is
always recording the AV input being received. Thus, it is not
possible to play back programs recorded beyond the specified
range of time since they are already overwritten. To avoid this in
order to save titles, perform normal recording or RetroActive
Recording (See below).
RetroActive Recording (HDD deck only)
You can start recording from the previous part of the AV input you
are currently watching (temporarily recorded on the background).
(See ATemporary recording for Live Memory (HDD deck only)B
above.)
1 Press S or O to locate the point to start recording from.
Each press of O increases the reverse search speed.
2 Press R on the unit to start RetroActive Recording. Or while
holding R, press I on the remote control.
3 Press o twice to stop RetroActive Recording.
The external input screen resumes.
NOTES:
You cannot use RetroActive Recording for inputs other than the
one you are currently watching.
Recording speed is automatically set to FR65 mode when
RetroActive Recording is started.
Temporarily recorded data prior to the beginning of RetroActive
Recording is erased when RetroActive Recording started.
Simultaneous Recording and Playback
You can play back the previous part of the AV input you are
recording or other programs available in the Library Database.
1 Press NAVIGATION. The Library Database Navigation screen
appears.
2 Press selection keys to select AORIGINALB, then press
ENTER.
3 Press selection keys to select the desired title, then press
ENTER.
For DVD-RAM, playback starts from the beginning of the title if
ACONTINUOUS PLAYB in ADVD SET UPB is set to AONB
(A pg. 59).
4 Press selection keys to select the desired playback method
(ABEGINNINGB, ARESUMEB or AREPEATB), then press
ENTER.
Playback of the selected title begins automatically.
5 Press o to stop playback.
The external input screen resumes.
NOTES:
You can use various playback features during Live Memory
Playback.
To stop simultaneous playback, press o. The external input
screen resumes. To stop actual recording, press o twice again.
Instant Replay
You can move back the playback position slightly during recording
or Live Memory Playback.
Press w on the remote control or INSTANT REPLAY on the unit.
8 DVD-RAM
Pressing once during recording skips back for approximately 30
seconds and starts Live Memory Playback. While pressing once
during Live Memory Playback skips back for approximately 7
seconds and resumes playback.
Each subsequent press skips back for approximately 7 seconds
and resumes playback.
Pressing while paused skips back for approximately 7 seconds
and resumes pause.
8 HDD
Pressing during recording skips back for approximately 7
seconds and starts Live Memory Playback. While pressing during
Live Memory Playback skips back for approximately 7 seconds
and resumes playback.
Each press skips back for approximately 7 seconds and resumes
playback.
Pressing while paused skips back for approximately 7 seconds
and resumes pause.
Resuming Playback (HDD deck only)
You can resume playback of an AV input you were recording or
watching from the point you have paused.
1 Press W to pause an AV input.
Recording continues when recording.
2 Press I to start Live Memory Playback.
Playback resumes from the paused position.
3 Press o to resume the external input screen.
About limitation on temporary recording
The temporary recording for Live Memory is canceled in the
following cases, and will start all over again when it is to resume.
When the power is turned off
When the system is powered again after a power failure was
occurred
When normal recording or RetroActive Recording is performed
When the ALIVE MEMORYB setting is changed (A pg. 59)
When dubbing is performed by pressing DUBBING (A pg. 45)
When ADVB is selected by pressing INPUT SELECT +/–
(A pg. 49)
DVM600US_00.book Page 37 Monday, September 25, 2006 1:54 PM