Filter
Top Products
Masterpage:Right+
EN 61
Filename [DVM600US_12Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 61Monday, 25 September 2006 13:54
Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to
delete all recordings and data on the disc.
To use a DVD-R disc in VR mode, format the new disc in VR mode.
(It will be in Video mode when not formatted.)
Format A DVD-RAM Disc
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press selection keys to select AHDD/DVD SET UPB, then
press G.
4 Press selection keys to select
ADISC SET UPB, then press
G.
5 Press selection keys to select
AFORMATB, then press
ENTER. Press selection keys
to select AEXECUTEB, then
press ENTER.
6 Press selection keys to select
AEXECUTEB, then press ENTER.
Format A DVD-RW Disc
1 Perform steps 1 – 4 of AFormat A DVD-RAM DiscB as above
before continuing.
2 Press selection keys to select AFORMATB, then press ENTER.
Press selection keys to choose AVR MODEB or AVIDEO
MODEB, then press ENTER.
AVR MODEB:
To be chosen when you want to record, erase, or edit data on
the disc repeatedly.
AVIDEO MODEB:
To be chosen when you want to erase all the data on the disc
once played back to record new data, or play back the disc on
other DVD players.
3 Press selection keys to select AEXECUTEB, then press
ENTER.
NOTES:
● It is impossible to format Version 1.0 DVD-RW discs in Video
mode.
● All the titles on a disc will be deleted once the disc is formatted
even if they are protected titles. (A pg. 40)
Format A DVD-R Disc
1 Perform steps 1 – 4 of AFormat A DVD-RAM DiscB as above
before continuing.
2 Press selection keys to select AFORMATB, then press ENTER.
Press selection keys to select AEXECUTEB, then press
ENTER.
Format A Disc (DVD Deck Only)
ATTENTION:
● When a disc is formatted, all recordings and data are erased. It
is impossible to restore them.
● Never turn off the unit or disconnect the AC power cord while
ANOW FORMATTING...B is displayed on the TV screen.
● DVD-R discs can only be formatted once.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Load a DVD-RAM/R/RW disc to format.
FGDE
ENTER
HDD
SET UP
DVD
DVDTV
Selection Keys
Video
Video
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
FINALIZE
CANC. FINALIZ.
HDD/DVD SET UP
FUNCTION SET UP
INITIAL SET UP
HDD SET UP
DVD SET UP
DISC SET UP DV SET UP
FORMAT
SELECT WITH @
PRESS [SET UP] TO EXIT
THEN PRESS [ENTER]
DVM600US_00.book Page 61 Monday, September 25, 2006 1:54 PM