Filter
Top Products
Filename [DVM700EU_12Subsidiary.fm]
Masterpage:Left+
64 EN
SUBSIDIARY SETTINGS
Page 64Wednesday, 20 September 2006 10:02
You can select a desired background from the 18 original
backgrounds or the backgrounds and/or text colours that you have
created (A pg. 63), and set it as the default background to be used
during finalisation (A pg. 44, 61).
Registering Default Background And Text Colour
1 Press SET UP to access the Main Menu screen.
2 Press selection keys to select AINITIAL SET UPB, then press
G.
3 Press selection keys to select AMENU BACKGROUNDB, then
press G.
4 Press selection keys to select AREGISTERB, then press
ENTER.
● The background selection screen appears. The current
background selected is indicated by a check mark AB
superimposed on it.
● To return to the previous screen, press RETURN.
5 Press selection keys to select the desired background, then
press ENTER.
● The AB mark is superimposed on the newly selected
background.
● A preview screen of the selected background will be displayed
for approximately 2 seconds.
● The selected background will be used as the default
background for finalisation.
6 Press SET UP to return to the normal screen.
NOTE:
When you update the backgrounds/text colour or restore the
original backgrounds/text colour, the default setting registered in
the above procedures will be cleared.
Previewing the background effect
This unit allows you to preview the effect of the background and/or
text colour you have selected before proceeding with finalisation.
This preview function is only possible when finalising a DVD-R/RW
(Video mode) disc.
After selecting a background in step 8 of AFinalise A DVD-R/RW
DiscB (A pg. 61):
A Press selection keys to select APREVIEWB, then press
ENTER.
● A preview screen of the final result of your selected background
will appear.
● To exit the preview screen, press ENTER.
● To preview again, press selection keys to select
ARECONFIRMB, then press ENTER.
B Press selection keys to select AOKB, then press ENTER to
continue with finalisation.
C Proceed to perform steps 9 - 11 of AFinalise A DVD-R/RW
DiscB (A pg. 61) to complete finalisation.
Setting The Background And Text
Colour
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
FGDE
ENTER
SET UP
RETURN
DVDTV
Selection Keys
DVM700EU_00.book Page 64 Wednesday, September 20, 2006 10:02 AM