Filter
Top Products
Masterpage:Right+
EN 45
Filename [SR-MV30U_06DVD Operation2.fm]
Page 45 March 30, 2004 5:46 pm
OPERATIONS ON DVD DECK
Check, Cancel And Change Programs
1 When the DVD timer lamp lights on the unit
Press DVD TIMER (#), then press 1.
When “” lights on the front display panel and the DVD
timer lamp also lights up on the unit.
Press 1.
When the DVD lamp does not light up on the unit
Press VCR/DVD repeatedly so that the DVD lamp lights up on the
unit.
2 Press PROG/CHECK to
access the Program Check
screen.
● To return to the previous screen
after you check the program, press
PROG/CHECK again.
To cancel the program
Press rt to select a program to
be cancelled, then press
CANCEL.
3 Press rt to select the program, then press ENTER. The
program screen appears.
4 Change the settings of the desired recording options as
required.
● Refer to steps 5 – 10 in “Manual Timer Programing” (੬ pg. 42).
5 Press PROG/CHECK to complete timer correction. The
previous screen resumes.
6 Press DVD TIMER (#).
● The DVD timer lamp also lights up on the unit and the VCR deck is
automatically selected. When the VCR deck is in timer standby
mode, the unit is automatically turned off.
1
4
7
2
5
8
0
3
6
9
PROG/CHECK
ENTER
CANCEL
1
DVD TIMER (#)
rtw e
VCR/DVD
Program’s information on the front display panel
You can check the details of the programs even when the power
is turned off. (It is necessary that the Power Save mode
(੬ pg. 74) is disengaged or the unit is not in timer standby
mode.) However, it is not possible to cancel or change the
program’s setting.
A Press PROG/CHECK.
● “NEW PROG” or “P-1” (if 8 programs have already been set)
appears.
B Press rt until the desired program number (“P-1” to “P-8”)
appears, then press ENTER.
C Press e.
● Each time you press e, the indication changes as follows (the
settings in parentheses are examples):
Date (“DATE 03.08SU”) ] Start time (“ON 11:00”) ] Stop time
(“OFF 11:30”) ] Channel (“CH 1”) ] Weekly/Daily (“MO-FR
DAILY”) ] Program number (“P-1”) and recording mode (SP) ]
(Back to the beginning)
D Press PROG/CHECK to complete checking.
● The normal display resumes.
SR-MV30U_00.book Page 45 Tuesday, March 30, 2004 5:46 PM