Filter
Top Products
41
LOCATE EDIT-OUT POINT
6
Press PLAY to start
playback. Find the point
where you want the edited
scene to end, then press
PAUSE.
Then, press IN/OUT. The
edit-out point appears on
the screen.
REGISTER ADDITIONAL
SCENES
7
Repeat steps 5 and 6.
● To change previously registered points, press . The
registered points disappear, one at a time, from the
most recently registered point.
PREPARE SOURCE TAPE
8
Rewind the tape in the DV deck to the beginning of the
scene you want to edit.
ENGAGE VHS DECK TO
RECORD-PAUSE MODE
9
Press VHS, then press and hold PAUSE and press
RECORD so that the VHS deck enters the Record-Pause
mode.
START EDITING
10
Press START.
● When dubbing is complete, the DV deck enters the
Pause mode, and the VHS deck enters its Record-
Pause mode.
STOP EDITING
11
Press STOP. The VHS deck stops playback.
Press DV, then press STOP. The DV deck stops
recording.
RETURN TO NORMAL
SCREEN
12
Press R.A.EDIT.
P1 IN OUT
1 0 : 3 1 : 0 2
→
0 : 5 4 : 0 0
2
→
3
→
4
→
5
→
6
→
7
→
8
→
TC 0 : 0 0 : 1 0
TOTAL 0 : 2 2 : 5 8
123
456
789
1
2
1
2
3
0
3
4
4
PLAY
PAUSE
VHS
RECORD
STOP
NOTES:
●
When Random Assemble Editing doesn't work, press
→
beside the DUB button, then perform Random Assemble
Editing again.
●
To cancel the registered scene, press . Each time is
pressed, the latest registered scene is erased.
●
When the source tape has more than 2 identical time codes
(
੬
pg. 16), the recorder may not find the edit-in point you
chose and a malfunction may occur.
●
When choosing a scene, set edit-in and edit-out points so that
there's a relatively large difference between them.
●
If the search time for an in-point exceeds 5 minutes, the
recording deck's Record-Pause mode will be cancelled and
editing will not take place.
●
If there are blank portions before or after the edit-in and edit-
out points, a blue-backed screen may be included in the
edited version.
●
Since time codes register time only as accurately as seconds,
the time code total time may not match the total programme
time exactly.
●
To quit Random Assemble Editing while it is still in progress,
press R.A.EDIT again to return to the R.A.EDIT screen. Press
R.A.EDIT once more to return to the normal screen.
●
To use Random Assemble Editing consecutively for two or
more programmes, press START for each programme.
When dubbing from another Mini DV cassette, swap the Mini
DV cassettes first, and then press START.
DV