Filter
Top Products
TM-2001U
TM-2701SU
11
Initial Setup
21
Channel Summary
Channel Summary allows you to customize the line-up of channels received by your TV. You can
add or delete channels from the line-up or prevent any unauthorized viewers from watching any or
all 181 channels.
Press the M
ENU
button
➐❷
To CHANNEL SUMMARY
➛❿
To operate
The Channel Summary screen (above) will now be displayed with the channels set to scan marked
with an "X". You can delete channels from the scan by removing the "X". If any channels were
missed during Auto Tuner Setup and you wish to add them, you may by placing an "X" next to the
channel number.
➐❷
To the ADD column
➛❿
To include or delete from scan
E
XIT
when finished
You can block access to a channel by activating the Channel Lock.
➐❷
To CHANNEL SUMMARY
➛❿
To operate
➐❷
To the Lock Column
Z
ERO
to lock or unlock that channel
E
XIT
when finished
Channel Guard Message
When a viewer attempts to watch a guarded channel, the following message appears:
To watch a channel that you have locked, enter the
Lock Code using the 10 key pad.
If the wrong code is entered, the message “INVALID
LOCK CODE!” will flash on the screen:
The channel cannot be accessed until the correct
code is entered.
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.
• See also “Set Lock Code”, page 29.
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
NO. - - - -
CH
02 X
X
X
X
X
01
03
04
05
ADD
CH
06
07
08
09
10
ADD
:
:
:
:
:
:
Initial Setup
20
Auto Tuner Setup
In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing the active
ones and skipping over blank ones or channels with weak signals. This means when you scan (using the
C
HANNEL
+/- buttons) you will receive only clear, active channels.
Press the M
ENU
button
➐❷
To AUTO TUNER SETUP
➛❿
To operate
➛❿☎
To choose CABLE or AIR
➐❷
To move to START
➛❿
To start Auto Tuner Setup
• Noise Muting will not work during Auto Tuner Setup.
NOW
PROGRAMMING !
PROGRAMMING OVER!
48
Programming will take approximately 1 to 2
minutes.
If you have already run the Auto Tuner as part of the quick setup earlier in this guide, please skip
ahead to “Channel Summary” to continue setting up your television.
• Some cable systems experience interference from radio frequencies on cable Channel 95.You
may delete this channel from your scan by removing the “X” next to it on the Channel Summary
screen shown on the next page.
NOTE: