Filter
Top Products
TM-2001U
TM-2701SU
17
Sound Settings
33
MTS technology allows several audio signals to be broadcast at once, giving you a choice in what
you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast may
also include a Second Audio Program (SAP)
.
Press the M
ENU
button
➐❷
To MTS
➛❿
Select the mode
(The ON AIR arrow tells you if a broadcast is in Stereo and/or contains an SAP).
• Keep the TV in STEREO mode to get the best sound quality. The sound will work in STEREO
mode even if a certain broadcast is in MONO sound only.
• Choose the MONO setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
MTS (Multi-Channel Television Sound)
If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the audio
through your stereo.
Press the M
ENU
button
➐❷
To TV SPEAKER
➛❿
To turn the TV's speakers ON or OFF
E
XIT
when finished
• Before you turn the TV Speaker setting from OFF to ON, make sure that the TVvolume level is low!
If the TVvolume is set too high, the sound level will be extremely loud.
• After a power interruption, the TV Speaker settings will return to “ON”.
TV Speaker
• External Speakers: When using external speakers or amplifiers, shut off the TV Speakers
(see ‘TV Speakers’) above.
NOTE:
TV SPEAKER ON OFF
Sound Settings
32
You can increase or decrease the level of low-frequency sound in the TV’s audio with the Bass adjustment.
Press the M
ENU button
➐❷
To BASS
❿
To increase the bass
➛
To decrease the bass
➐❷
To move to the next setting
Use Treble to adjust the level of high-frequency sound in your TV’s audio.
Press the M
ENU button
➐❷
To TREBLE
❿
To increase the treble
➛
To decrease the treble
➐❷
To move to the next setting
Adjust the level of sound between the TV’s two speakers with the Balance setting.
Press the M
ENU button
➐❷
To BALANCE
❿
To shift the balance towards the right speaker
➛
To shift the balance towards the left
speaker
➐❷
To move to the next setting
Treble
Balance
Bass
You can leave the Sound Settings menu at any time by pressing the EXIT button on the remote control.
NOTE: