Filter
Top Products
30
ADVANCED OPERATIONS (cont.)
RF Cable
(provided)
21-pin SCART Cable
(not provided)
Player Your recorder Recorder Your recorderTV Receiver
TV Receiver
RF Cable
(provided)
21-pin SCART Cable
(not provided)
VIDEO
CHAN-
NEL or
AV mode
VIDEO
CHAN-
NEL or
AV mode
Another recorder
Another recorder
Recorder
Player
A B
NOTES:
●
All necessary cables can be obtained from your dealer.
●
For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.
●
When you select EDIT to dub tapes in step 3, be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish
dubbing the tapes.
●
When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting (
੬
pg. 34).
●
If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this
recorder's S-VIDEO IN/S OUT and AUDIO IN/OUT connectors.
When Using Your Video Recorder As The Source Player ...
... connect its rear panel S OUT and AUDIO OUT connectors to the recording deck's S-Video and Audio input connectors.
When Using Your Video Recorder As The Recording Deck ...
... connect its rear panel S-VIDEO and AUDIO input connectors to the source player's S-Video and Audio output connectors.
Then, set the recorder's input mode to "S-1".
Another recorder
Recorder
Player
Your recorder
TV Receiver
21-pin SCART Cable
(not provided)
S-Video Cable
(not provided)
C