Filter
Top Products
32
AV1 IN/OUT
AV2 IN/DECODER
AV1 OUT
COMP. Y/C
ANT. IN
RF OUT
R
L
AUDIO
OUT
S VIDEO
IN
INOUT
DECODER VCR TV
This facility allows you to record automatically a satellite programme which is timer-programmed on your external satellite receiver.
Connect a satellite receiver to the recorder's AV2 IN/DECODER connector and programme the timer on the satellite receiver; the
recorder starts recording when the signals input from the satellite receiver to the AV2 IN/DECODER connector, and when there is no
input signals the recorder stops recording and the power shuts off.
Automatic Satellite
Programme Recording
NOTE:
Refer to the instructions supplied with your satellite receiver.
Mains outlet
TV Aerial cable
Satellite Receiver Unit
Satellite Cable
Outdoor Unit
Aerial
Back of TV
21-pin AV input
connector (SCART)
RF OUT
ANT. IN
Back of Recorder
ADVANCED OPERATIONS (cont.)
AV1 OUT switch
IMPORTANT
When you set "AV2 SELECT" to "SAT" (੬ pg. 31), it is possible to view a satellite broadcast with the TV set to its AV mode even
if the recorder is in Timer mode, in Stop mode, recording or turned off. When the recorder is in Stop mode or recording, press
TV/VCR on the remote control to turn off the VCR indicator on the display panel.
●
In this case, be sure to set the AV1 OUT switch on the rear panel to COMP.
Aerial
connector
AUDIO IN
connectors
S-VIDEO IN
connector
S-VIDEO OUT