Filter
Top Products
44 EN
123
456
7
89
0
2
4
1
3
REW
FF
JOG
SHUTTLE
STANDBY/ ON
TIMER S-VHS ET
STOP/EJECT
DIGITAL
TBC/NR
PAUSE
PLAY
VIDEOS-VIDEO (S-2)
(
MONO
)
L —AUDIO— R
TV PROG
SYNCHRO EDIT
SP/LP/EP
COLOUR SYSTEM
INSERT A.DUB
REC
Insert editing replaces part of the recorded scene with new
material. Both the picture and Hi-Fi audio soundtrack are
replaced with new ones, while the normal audio soundtrack
remains unchanged. If you wish to change the normal audio
track as well, use the audio dubbing function simultaneously.
Use your video recorder as the recorder.
Insert Editing
EDITING (cont.)
NUMBER "0"
MAKE CONNECTIONS
1
Connect the player's VIDEO OUT and AUDIO OUT
connectors to your recorder's VIDEO (or S-VIDEO) and
AUDIO input connectors on the front panel.
SET INPUT MODE
2
Press NUMBER key "0" and/or TV PROG so that "F-1"
for the VIDEO/AUDIO input connectors or "S-2" for the
S-VIDEO/AUDIO input connectors appears in place of
a channel number.
LOCATE END POINT
3
Load the recording cassette into your recorder, and play
it back to determine the edit-out point (the end of the
segment to be replaced) using the TIME SCAN
SHUTTLE ring or the JOG dial or pressing PUSH
JOG and PAUSE.
RESET THE COUNTER
4
Press C. RESET to change the counter display to
"0:00:00".
LOCATE START POINT
5
Determine the edit-in point (the beginning of the
segment to be replaced) using the TIME SCAN
SHUTTLE ring or the JOG dial or pressing PUSH
JOG and PAUSE.
● Be sure to engage the Still mode at the edit-in point.
Before insert editing
After insert editing
Source tape
Recorded tape
Normal audio
track
PAUSE
Recorder
Your recorder
Player
Audio/Video signal
JOG
PAUSE
Another recorder
Video/Hi-Fi
audio track
TV PROG
TV PROG
PUSH JOG
TIME SCAN SHUTTLE
fi
%
fi
%
S-Video signal
C.RESET