Filter
Top Products
8 EN
123
456
7
89
0
2
4
1
3
INITIAL SETTINGS (cont.)
Auto Set Up
Before starting, make sure of the following:
● The TV aerial cable should be connected to the recorder.
● The recorder's mains power cord should be connected to
a mains outlet.
੬ pg. 4, 5
●
The "Video Channel Set" procedure should be done first
and the TV should be set to its AV mode (with AV or S-
VIDEO connection
੬ pg. 7) or video channel (with RF
connection
੬ pg. 6).
The Auto Set Up function simplifies installation by guiding you
through the procedures of setting the language, clock and tuner
channels — simply follow the on-screen menus that appear.
IMPORTANT
● Don't press any buttons on the recorder or remote that
are not directly related to the step you are performing
while Auto Set Up is in progress.
● If you perform Auto Set Up successfully during installa-
tion, there's no need to separately perform the Language
Select, Clock Set or Channel Set procedures, but if
adjustments become necessary they can be performed as
follows:
– To change the selected language
੬ pg. 11
– To reset or adjust the time
੬ pg. 12
– To add/delete channels manually
੬ pg. 53
– To reset the tuner after moving to a different location
੬ pg. 52
SELECT LANGUAGE
1
Press PUSH JOG %fi to place the pointer next to your
desired language (English or Chinese), then press OK or
PUSH JOG .
● The Clock Set screen appears.
SET TIME
2
Press PUSH JOG %fi to
set the time, then press OK
or PUSH JOG .
● Press and hold either
button to delay or
advance the time by 30
minutes.
SET DATE
3
Press PUSH JOG %fi to set the date, then press OK or
PUSH JOG .
● Press and hold either button to change the date by 15
days.
SET YEAR
4
Press PUSH JOG %fi to set the year, then press MENU.
CLOCK SET
TIME DATE YEAR
0:00 01.01 99
[
5
/
∞
] =
[MENU] : EXIT
fi
fi
fi
PUSH JOG
MENU
OK