Filter
Top Products
10
PORTABLE DVD PLAYER USER GUIDE
1-1 Getting Started - continued
PAL
Antenna
Cable TV
NTSC
Receiving Antenna TV Signal
You could input images and sounds from
external equipment by connecting the por-
table DVD player to external equipment with
the audio or video cable.
1 Raise the JD-TV108's telescoping
antenna and position the unit so it is
set to receive the best TV signals.
Receiving TV Signal from Cable
1 Connect the RF cable or antenna cable to
the Antenna/Cable TV input jack (ANT.)
on the lower right side of the DVD player.
T
Telescoping Antenna Outdoor Antenna
Channel 56
Freq 415.3MHz
Favorite Yes
Auto search
How to Use TV Tuner
• Make sure that the DVD Player is correctly
connected.
• TV reception quality maybe different due to
various areas.
1 Press Power button on the top
panel of the unit to turn on the DVD
Player.
2 Press Mode to select the
"TV Tuner" mode.
Note:
• Press Mode a number of times. You can
toggle through different modes, including
“DVD Mode”, “USB”, “CARD”, “AV IN” and
"TV TUNER”.
3 Press TV to select CABLE or
ANTENNA as the TV source.
4
Press Search, a TV tuner window
appears on the screen.
5 Press
Up
/
Down
to highlight a
preferred option.
6 Press
Left
/
Right
to select a
setting for the highlighted option.
Channel
• Press
Right
to select the next chan-
nel or press
Left
to select the previ-
ous channel.
see the
Quick Guide,
page xx