Filter
Top Products
38
PORTABLE DVD PLAYER USER GUIDE
SYMPTOM (COMMON) REMEDY
5-1 Troubleshooting - continued
Audio soundtrack and/or subtitle language • If the audio soundtrack and/or subtitle language does not exist on the disc, the
is not the one selected at the initial settings. language selected at the initial settings will not be seen/heard.
No subtitles. • Subtitles appear only with discs that contain them.
•
Subtitles are hidden from the TV screen. Press SUBTITLE to display the subtitles.
Alternative audio soundtrack (or subtitle) • Ιf an alternative language cannot be selected, it may be because there are no
language available. other languages available.
Angle cannot change. • This function depends on software availability. Even if a disc has a number of
angles recorded, these angles may be recorded for specic scenes only.
No sound when connecting to • Check if the disc supports 5.1 channel sound.
5.1 channel speakers • Check if the speaker is properly connected.
• Check if the audio output setting is correct.
No key operation (by the DVD Recorder • Turn the unit off and then back to on. Alternatively, turn off the unit, disconnect
and/or the remote control) is effective. the AC power cord and then re-connect it. (The recorder may not be operating
properly due to lightning, static electricity or some other external factor.)
No picture and sound (for recorded disc) • Check if the DVD Player and external equipment are properly connected.
• Check if the scheduled recording setting is correct.
• Check if the correct recordable disc is being used. (DVD+RW/DVD+R)
• Check if power set to stand-by mode while using schedule recording.
• Check if the disc has been closed. (only for DVD+R disc)
Distorted picture or no image • Check if the TV system settings are correct.
• Check if the output format is in “Progressive Scan”. If so, you have to set
“Component” in the video output setting. The actual output format must match
the output format setting.
OSD setting doesn’t get executed • Some settings must be stored by pressing left button. Re-check it.