Filter
Top Products
Receiver operation
14
Programme overview
(in TV mode only)
•
Press the
key once again:
The programme overview appears on the screen.
The programme currently selected is indicated by <..>.
•
The
keys can be used to single-step through the programme list
while the
keys allow you to page through in steps of 10.
•
Pressing the
key once results in switchover to the marked programme.
On exiting the programme overview with
key there is a switch back to
the previous programme.
•
Pressing the
key twice results in switchover to the marked programme
and exit from the programme overview.
•
To exit from the menu without selecting a programme press key
.
Picture optimisation when reception is weak
Where weak reception results in a grainy picture as, for example, at the fringes of
the reception area, the "Picture optimisation" function can be used to achieve an
improvement.
•
Press the
key. The following on-screen display appears:
With the keys you can now carry out picture optimisation.
Note The power radiated by individual transponders (satellite programmes) varies. Be-
sides this, the footprints of the transponders are also different. Picture optimisation
must therefore be carried out for each programme and is not stored either. This
means that picture optimisation must be carried out again after changing the pro-
gramme.