Filter
Top Products
Programming TV programmes
18
The “Audio” menu
The following settings can be made in the audio menu:
P002
ZDF
TV sound
Mode: Stereo
Frequency: 7.02/7.20 MHz
De-emphasis: DNR/75µs
VOL 0-9 VID A/B STOR STBY
Audio mode
Setting of operating mode as: “Stereo”, “Mono narrow” or “Mono wide”
Operating mode “Stereo“ and “Mono narrow“ is selected on reception of the sound
sub-carrier, “Mono wide“ is selected on reception of the sound main carrier.
Audio frequency
Input of the audio frequency via the numeric keys
... is in 3-digit form in
the range 5.00 to 8.80 MHz. In stereo mode, the frequency is to be entered for the
left sound channel. The frequency for the right sound channel then automatically
lies 180 kHz above the left sound frequency.
The following is a list of fixed, pre-programmed audio frequencies that can be se-
lected using the
keys.
Mode
Sound carrier fre-
quencies
Mode
Sound carrier fre-
quencies
Stereo
Mono
(wide)
MWD
7.02 / 7.20 MHz
7.38 / 7.56 MHz
7.74 / 7.92 MHz
8.10 / 8.28 MHz
5.80 MHz
6.50 MHz
6.60 MHz
6.65 MHz
6.80 MHz
Mono
(narrow)
MNR
7.02 MHz
7.20 MHz
7.38 MHz
7.56 MHz
7.74 MHz
7.92 MHz
8.10 MHz
8.28 MHz
Audio de-emphasis (for sound type " Mono wide" only)
Set the de-emphasis for the best sound impression to 50
µ
s or J17.
In the “Stereo“ and “Mono narrow“ audio modes, the de-emphasis “dnr" with “75
µ
s" is selected automatically.
Stereo, Mono narrow:
dnr, 75
µ
s
Mono wide:
50
µ
s or J17
•
Save the settings with the
key (press twice).
If you want to make new settings for further programme slots:
•
Change over to the “Video menu“ with the
key.
•
Move to the first menu line, “Programme slot“, and select the next programme
slot.
•
Select further programme slots in the same manner.
•
To exit the setup menu press the
key.