Filter
Top Products
Initial settings
32
• Select the desired satellite using the
keys, e.g. “EUTELSAT13“.
Satellite frequency MHz The frequency of the new transponder is entered in this line.
• Enter the frequency using the numeric keys to , e.g. 12379.
Polarisation The polarisation of the new transponder is selected in this line.
• Select the desired polarisation with the
keys, e.g. vertical.
Symbol rate The symbol rate of the new transponder is entered in this line.
• Enter the symbol rate using the numeric keys
to , e.g. 12379
Viterbi rate The Viterbi rate of the new transponder is entered in this line.
• Select the desired Viterbi rate with the
keys, e.g. 2/3.
• Confirm your entries with the
key.
• Leave the menu with the
key and save the changes with the key
New digital programme
This menu entry is intended for subsequent extensions.
Parental lock
This menu entry is described in the “Receiver operation“ chapter.