Filter
Top Products
Main Menu
18
Setting the Timer (Automatic Programming)
Note:
The timer can also be programmed with the Electronic Programme
Guide (EPG). See Page 14.
The clock must be set correctly in order that the timer is ready for
operation (see Installation Menu).
Programme the Timer Number (1 to 8), activate the timer to release
the settings, and then select status, start time and end time, and the
number of the desired programme.
To select the programme, press the OK key in the “Channel” field. The
programme list is displayed, and you can now select the desired
programme with the / keys. Confirm the selection with the OK key
to take it over in the timer.