Filter
Top Products
Installation Menu
24
Clock Parameters
Date and time must be programmed in order that the receiver
indicates the correct information messages when you use the
timers, and in the information messages mode (and on the front in
stand-by mode).
The internal clock can be set as follows:
a) The transmitted time of day can be used (default setting). In
this case, the difference between GMT and local time must
be allowed for (in Germany, + 2 hrs. In summer, + 1 hr. in
winter).
b) If you select «AUS» (off) in the first field, you must enter the
time and date manually, with the numeric keypad.
Note: Some programmes may not transmit correct UTC. In this case, the
receiver displays the wrong time of day. To display the time of day you
had before, switch to another European programme, and wait a few
minutes until the receiver shows the correct time again.