Filter
Top Products
Installation Menu
27
Software Update
Attention: A PC and a null-modem cable are required for the update process!
If new software for your DVB-T receiver should become available, you
can download it from the following homepage:
www.esc-kathrein.de/download/
There you will also find information and notes on the software update
process via the RS 232 interface on the receiver. You can also order
the required null-modem cable from the ESC company in Grassau at
the following address:
ESC Elektronik Service
Chiemgau GmbH
Bahnhofstraße 108
83224 Grassau
Tel.: (0 86 41) 95 45-0
Fax.: (0 86 41) 95 45 35 u. 95 45 36
E-mail: service@esc-kathrein.de
Internet: http://www.esc-kathrein.de
Note: After successful software download of the software, you must carry out
a works reset. Your old password is no longer valid after the software
update. You must now enter the universal password (0786).
You will find instructions how to carry out the works reset on Page 25.