Filter
Top Products
50
SECURITY
Press the
button to open the main menu. Select the “Security” menu using the
buttons
and press the
button. Enter the receiver PIN (factory setting “0000”) and confi rm it by pressing
the
button. The following display appears (see example below):
Use the
buttons to select the lines to be changed and use the
buttons to perform the
settings.
Receiver Lock:
If the receiver lock is set to “On”, when the receiver is switched on it will request input of the PIN.
Menu Lock:
If the menu lock is set to “On”, the PIN must be entered as soon as the main menu is opened.
Channel Lock:
If the channel lock is set to “On”, the PIN must be entered as soon as a channel is opened that
has been marked as locked in “Edit Channel List”.
Change Device-PIN:
Press the
button – you will be requested to enter the old PIN. Confi rm the entry of the old PIN
using the
button. Now enter the new PIN and confi rm by pressing the button. Then you must enter
the new PIN again and also confi rm using the
button. “The receiver PIN has now been changed”
is displayed. Press the
button to close the message.