Kathrein UFS 790si Satellite TV System User Manual


 
32
OPERATION
When using teletext via the receiver remote control:
You can open the required teletext page using the number pad. Using the

buttons you can page
back and forwards by one page. If you press the
button again, the teletext is displayed transparent.
To leave the teletext, press again the
button or the
button.
TELETEXT
Press the
button to open teletext. When
teletext is opened for the rst time you will
be asked whether you wish in future to open
teletext using the receiver remote control or,
as usual, using the TV set remote control
(see screenshot below). Use the

buttons to select the desired variant and
press the
button to con rm.
If the banner displays the following icon , this is a portal channel. Pressing the
"
(yellow)
button displays the channels available on this portal (such as matches on a speci c day of play). In this
example three “sub-channels” are available for selection within this portal channel. Select the channels
using the

buttons and
.
OPENING THE OPTIONS CHANNEL
PICTURE SCALING AND AUDIO OUTPUT FORMAT
By pressing the
!
(green) button you can change
the following settings directly on the TV screen,
without having to open the main menu:
- Picture Scaling: Select using the
(red) button. The possible settings depend on the setting you made
on the “Box Settings”, “TV picture settings”.
- HD Video Resolution: Select using the
#
(blue) button. Select the setting suitable for your TV set
(note the information in the operating instructions for your TV set).
- Audio Format: Select using the
!
(green) button. You can choose between the settings Stereo,
Mono (left), Mono (right) and Mono.
The display disappears again automatically after approx. ve seconds.