Filter
Top Products
35
“PREVIEW” VIEW (PROGRAM MAGAZINE)
Also note the bars at the bottom
of the on-screen display! These
provide information on what to
do next.
You can use the cursor buttons (
) or the number pad buttons to select the desired channel
and, if available, you can use the
button to open further information on the desired program.
The
button allows you to look ahead in 15 minute steps to future programs on the channels
(press the
button to return to the current time).
If you wish to view the program currently being shown on a channel, you need not to exit the EPG,
just select the desired channel and press the
button. At the top right of the screen you will see the
current TV picture for the selected channel. The picture only appears once the
button has been
pressed. What you saw before was the picture of the old channel that had previously been selected,
even though the EPG was no longer set to that channel.
EPG (ELECTRONIC PROGRAM GUIDE)
In the “Preview” view you will see all the programs that will be shown on the channel previously selected
in the “Current”. Provided that EPG data has been supplied by the channel provider, the receiver
shows the programs that will be shown on the selected channel for several days in advance.
You can use the cursor buttons (
) to select the desired program and, if available, you can use
the
button to open further information on the desired program.
You can use the
buttons to scroll through the programs in the order of the overall list of programs
(the programs can also be selected by entering digits with the number pad); you remain however
in “Preview” view.
The
&
button allows you to scroll backwards and forwards a day at a time.
Using the
(red dot) button you can load the selected program into the recording settings (see “Recording”
section).
The “Preview” view (program magazine) can be opened at any time in EPG by pressing the
"
(yellow)
button.