Filter
Top Products
7
Remote Control
2
Press the MUSIC, MOVIE, or TV key to execute the
corresponding macro play.
1
Press the MACRO key.
•"MACRO EXE" appears in the display and the pre-programmed macro
is performed:
MUSIC = "MACRO 1", MOVIE = "MACRO 2", TV = "MACRO 3"
• Some devices take up to 1 second to power on. The macro function
has an automatic delay after any power function output.
• Pressing a key other than MUSIC, MOVIE, or TV cancels the macro
program mode.
Getting the most from your remote control
When MUSIC is pressed
To delete the setup code
Select MACRO
MACRO EXE
Menu
Select MACRO
MACRO1 EXE
Menu
•“MACRO EXE” appears in the display.
1
Press the display operation 1 key repeatedly until
“
Menu
” appears in the display.
VCR
Video1:
Menu
2
Press the [Menu] key repeatedly until “
01.IR
” appears
in the display.
Press the
5
/
∞
keys to select “
01.IR
,” then press the
[Enter] key.
• The setup display appears.
3
• The input selecting display appears.
Press the
5
/
∞
keys to select the input that you want to
delete, then press the [Enter] key.
4
Press the
5
/
∞
keys to select “
Delete
.”
5
Press [Enter].
6
• The setup code is deleted.
MACRO
MUSIC, MOVIE,
TV
+
–
+
–
>04.Video2
>03.Video1
Back Enter
>02.Surround
>01.IR
Home Enter
During opration, make sure you start the next step within 8
seconds of completing the previous one. If more than 8
seconds elapses between any two steps, press the display
operation key so that the display appears.
During opration, make sure you start the next step within 8
seconds of completing the previous one. If more than 8
seconds elapses between any two steps, press the display
operation key so that the display appears.
>01:CD
>13:Delete
Back Enter
Executing an automatic operation
Display operation 1
5/∞
Display operation 2
+
–
+
–