Filter
Top Products
Recording
Recording
28
Recording from a DV
(Digital Video) camcorder
You can record the contents of DV tape from a DV
camcorder.
Make sure your digital camcorder is connected to
DV IN jack on the front panel.
Also turn on your DV camcorder and set it to PLAY
(or VCR) mode.
1
Press DVD/HDD button to select the
HDD(Hard Disk Drive) or a recordable
DVD (DVD+R/DVD+RW) on which you
want to record.
If you want to record on DVD, load a
DVD+RW or DVD+R disc with enough free
space for the recording, and press
STOP
button twice to stop.
2
Press REC MODE button to set the record
quality/recording time.
3
Press SOURCE button to choose DV IN.
Every time this button is pressed, the A/V
source is changed :
4
Find the place on the camcorder tape that
you want to start recording from.
You can use the remote controller for this
recorder to control the camcorder using
PLAY, STOP, PAUSE, , button
when the information of DV is displayed on
the top of screen. If the information of DV
disappears, press
DISPLAY button to show
it.
5
Press REC button at the point from which
you want to record during playback of DV
tape.
6
Press STOP button to stop your recording.
• Depending on the connected camcorder, you may not
be able to control it using the remote control supplied
with this recorder.
NOTE
If you want to record the TV program, select
TV mode.
And choose the station you want to record by
pressing
CHANNEL – or CHANNEL +
button.