Filter
Top Products
- 33 -
19. Troubleshooting
Display is blank/DVD player shows no functions
even though it is switched on
A Check whether the power supply unit is properly
plugged into the socket.
B Check to see that the socket, into which you
have plugged the power supply unit of the DVD
player is supplying electricity by plugging in
another device. If necessary, plug the power
supply unit of the DVD player into another socket.
C Switch off the DVD player with the POWER
switch and then wait ten seconds. Subsequently
switch the DVD player on again.
Display shows "No Disc" even though a disc is
inserted
A The disc is dirty, scratched or damaged. Clean
the disc or insert another disc.
B The Country/Region code on the inserted
DVD/VCD/S-VCD does not correspond to the
Country/Region code of the DVD player. In this
case the DVD/VCD/S-VCD cannot be played
with the DVD player.
Inserted disc will not playback
• A film of condensation may have formed on the
laser sensor lens of the DVD player. In particular
this may occur if the DVD player has been subjected
to large temperature fluctuations.
If this is the case place the DVD player in a dry envi-
ronment at normal room temperature. First remove
any disc that may be inserted into the disc tray. Then
leave the DVD player switched off for at least one
hour without using until the condensation film has
evaporated.
No image or black/white image only
A Check to make sure that all connection cables
between the DVD player and the LCD monitors
(or other devices) are firmly inserted into the
corresponding sockets
B Check to see that the television standard,
which you set with the N/P button matches the
connection variation, with which you have con-
nected the DVD player to a television (or video
projector) .
C Check by means of the televisions (or Video
projectors) operating instructions to see if set-
tings to the television (or Video projector) may
be necessary in order to use the DVD player
with the television.
No sound
A Check to see if the DVD player is possibly switched
to mute (MUTE button).
B Check to see that all connecting cables between
the DVD player and potentially connected audio
components are firmly plugged into the corre-
sponding sockets
C Check to see if you have reduced the volume
on the LCD monitors
D Check by means of the televisions operating in-
structions to see if settings to the television may
be necessary in order to use the DVD player
with the television.
E Check by means of the operating instructions
for a potential connected audio component if
settings to it are necessary in order to use it
with the DVD player.
No 4:3 or 16:9 image
A Check by means of the televisions operating
instructions, which image formats the television
has at its disposal.
B Check to see if the settings in the OSD menu
match the available image format of the television.
IB_KH2360_V5256_UK.qxd 31.08.2007 13:49 Uhr Seite 33