10 TBUS-6xl - Installing the TBUS-6xl
5.1.3 Installing a MegaTOOL
To install a MegaTOOL, as shown in Figure 3:
1. Screw the supplied spacers to their designated places (one on each side).
2. Insert the MegaTOOL, from beneath, through the MegaTOOL opening.
3. Screw the screws (one on each side) through the frame holes and spacers.
Figure 3: Installing the MegaTOOL
5.2 Installing the Inner Frame
To install the inner frame:
1. Place the inner frame inside the TBUS-6xl enclosure.
2. Set the required height using your fingers to bring the inner frame to the
desired position, screw and tighten it in place using the height adjustment
screws (supplied with the inner frame).
i
Inner frame kits come with assembly instructions.