Filter
Top Products
Using the ADCU Interface
54-0161-01
19
3.2 Setting Display Brightness
The ADCU display’s brightness may be adjusted to suit your
preferences. Press the right key to make the display brighter, the
left key to make it dimmer. When you are satisfied with the
setting, press the center key to accept the setting. Refer to the
Quick Reference Guide on page 18 for instructions on reaching
this menu.
3.3 Selecting TracVision or
GyroTrac-only Operations
GyroTrac’s factory default configuration is to operate as a stand-
alone system (Antenna Comm: OFF). Connecting a TracVision
antenna will reconfigure GyroTrac to function as a component of
a TracVision system (Antenna Comm: ON). Refer to the Quick
Reference Guide on page 18 for instructions on reaching this
menu.
Set brightness?
Yes Next Return
Min Bright Max
*****************
Figure 3-2
Display Brightness Controls
Set TV com On/Off?
Yes Next Return
Antenna Comm is: ON
On ENTER Off
Figure 3-3
Selecting TracVision or
GyroTrac-only Operations
If the antenna is not receiving data
from the GyroTrac and the ADCU is
not displaying antenna-specific
menus, it may be because the
antenna communication is turned
off. Use this menu to check and
turn antenna communications back
on if necessary.