Filter
Top Products
11
CARE AND MAINTENANCE:
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Lithium, Standard, or Rechargeable Batteries
Do not expose the Forecast Station to extreme temperatures, vibration or shock. Keep dry.
Clean Forecast Station with a soft damp cloth. Do not use solvents or scouring agents.
The Forecast Station is not a toy. Keep it out of reach of children.
The Forecast Station is not to be used for medical purpose or for public information, but is determined
for home use only.
The specifications of this Forecast Station may change without prior notice.
Improper use or unauthorized opening of housing will void the warranty.
If the Forecast Station does not work properly, change the batteries and/or check the a/c cord
connection.
POSITION THE OUTDOOR TRANSMITTER:
The remote temperature transmitter should be mounted vertically to avoid damage.
WALL MOUNT
1. Choose a location for the transmitter that is within range of the Forecast Station and
under an overhang for accuracy.
2. Install one mounting screw (not included) into a wall leaving approximately ½ inch
(12.7mm) extended..
3. Place the transmitter onto the screw, using the hanging hole on the backside.
4. Gently pull the transmitter down to lock the screw into place.
NOTE: Always ensure that the transmitter locks onto the screw before releasing.
To achieve a true temperature/humidity reading, mount where direct sunlight cannot reach the outdoor
transmitter. Mount the outdoor transmitter on a North-facing wall or in any well shaded area. Under an
eave or deck rail work well. The maximum transmitting range in open air is 200-feet (60 meters).
Obstacles such as walls, windows, stucco, concrete, and large metal objects can reduce the range. Place
the transmitter at least 6 feet in the air to improve signal transmission.
Place both units in their desired location, and wait approximately 1-hour before permanently mounting the
transmitter to ensure that there is proper reception. The outdoor temperature/humidity transmitter is water
resistant, not waterproof and should not be placed anywhere it will become submerged in water or subject
to standing water or snow.
POSITION THE FORECAST STATION:
1. The Forecast Station has a wide base to sit on a desk or table.
2. Choose a location 6 feet or more from electronics such as cordless phones, gaming systems,
televisions, microwaves, routers etc.
3. Place within range of the outdoor transmitter.
4. The maximum transmitting range in open air is 200-feet (60 meters). Obstacles such as walls,
windows, stucco, concrete, and large metal objects can reduce the range.
12
SPECIFICATIONS:
Indoor:
Temperature Range: +32° F to +122°F (0° C to + 50° C)
Humidity Range: 1%-99% (RH)
Interval: Every 30 seconds
Outdoor:
Temperature Range: -40°F to 140°F (-40°C to 50°C)
Use Alkaline batteries in outdoor sensor: -20°F to 140°F (-20°C to 60°C)
Switch to Lithium batteries in outdoor sensor if temperature drops below - 20°F (-28.8°C)
Humidity Range: 1%-99% (RH)
Distance: 200 ft. (60 meters) RF 433MHz (open air)
Interval: Every 50 seconds
Power:
Forecast Station: 5-volt a/c power adapter (included)
Optional 3-AA, IEC, LR6 batteries (not included)
TX14TH Transmitter: 2-AA, IEC, LR6 batteries (included)
Battery Life:
TX14TH Transmitter
Battery Life: Battery life is over 24 months when using reputable battery brands for both
Alkaline and Lithium batteries
Forecast Station
Battery Backup: Battery life is over 24 months when using the AC adapter for primary power
Dimensions:
Forecast Station: 5.9” L x 2.36” W x 5.9” H (150 x 60 x 150mm)
TX14TH Transmitter: 2.5” L x 1.42” W x 3.98” H (64 x 36 x 101mm)
ACCURACY:
Indoor Temperature:
Operating temperature range = 32 F to 122 F (0C to 50C)
Accuracy ± 2 degrees Fahrenheit 32 F to 122 F (0C to 50C)
Resolution = 0.1 degree F
When above 122 F (50C) the temperature sensor should continue to read the correct temperature as
long as the LCD Forecast Station continues to function
When below 32 F (0C) the temperature sensor should continue to read correctly as long as the LCD
Forecast Station continues to function
Indoor Humidity:
Operating Temperature Range = 32F to 120F (0C to 50C)
Operating humidity range = 1% RH to 99%
Accuracy +/- 5% RH (@77
o
F (25
o
C) , 30%RH to 80%RH)
Accuracy +/- 8% RH (@77
o
F (25
o
C) , 20%RH to29%RH & 80%RH to 95%RH)
Accuracy +/-12% RH (@77
o
F (25
o
C) , 1%RH to 19%RH & 96%RH to 99%RH)
Resolution = 1 % RH
Outdoor Temperature:
Operating temperature range = -40 F to 140F (-40C to 60C)
Accuracy ± 2 degrees Fahrenheit 32 F to 122 F (0C to 50C)
Accuracy ±4 degrees Fahrenheit -40 F to32 F (-40C to 0C) & 122 F to140 F (50C to 60C)᧥
Resolution = 1 degree F
When above 140 F (60C) the temperature sensor should continue to read the correct temperature as
long as the LCD Forecast Station continues to function
When below -40F (-40C) the temperature sensor should Forecast Station continue to read correctly
as long as the LCD Forecast Station continues to function