Filter
Top Products
10 PLASMA TV
Installation
- HDMI
TM
, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing.
- This set can receive the High-Definition Multimedia Interface
(HDMI) or Input of Digital Visual Interface(DVI).
- This set supports HDCP (High-bandwidth Digital Contents
Protection) Protocol for the set (480p, 720p, 1080i) modes.
- When you connect to HDMI/DVI Source devices (DVD
Player, STB or PC) that support AUTO HDMI/DVI Plug &
Play, this sets the HDMI/DVI source devices automatically.
After reading HDMI/DVI source devices, using Display Data
Channel (DDC) Protocol, Extended Display Identification
Data (EDID) stored in the set is used.
If HDMI/DVI Source devices do not support AUTO
HDMI/DVI, the resolution is set manually.
- When Source Devices have DVI Output Connector, you
must connect audio with separated cable.
(Refer to <How to connect>)
How to connect
1. When Source Devices (DVD Player or Set Top Box) support
HDMI.
- If Source Devices have HDMI Output Connector, Source
Devices connect to the set with HDMI Cable .(not supplied
with the product).
- If Source Devices support Auto HDMI, automatically, Source
Devices divert output resolution in 1280 x 720p. But if not,
refer to the reference Manual of Source Devices and select
resolution manually.
- To get the best picture quality, adjust the DVD Player or Set
Top Box output resolution to 1280 x 720p.
- Because HDMI sends Digital Video and Audio with one
cable, there is no need for a special Audio Cable when using
a HDMI Cable.
2. When Source Devices (DVD Player or Set Top Box) sup-
ports DVI.
- If Source Devices have DVI Output Connector, Source
Devices connect to the set with HDMI to DVI Cable (not sup-
plied with the product).
- If Source Devices support Auto DVI, automatically, Source
Devices divert output resolution in : 1280 x 720p. But if not,
refer to the reference Manual of Source Devices and select
resolution manually.
- To get the best picture quality, adjust the DVD Player or Set
Top Box output resolution to 1280 x 720p.
- In this case, use another cable for audio. When Source
Devices have Analog Audio Output Connector, RGB/DVI
Audio Input of the set connect to Audio Cable (not supplied
with the product). And then you can listen to normal Audio.
3. When PC supports DVI.
- If PC have DVI Output Connector, Source Devices connect to
the set with HDMI to DVI Cable (not supplied with the product).
- To get the best picture quality, adjust the PC graphics card
to 1024 x 768, 60Hz.
- Use the the set’s HDMI/DVI (VIDEO) for video connections,
depending on your PC connector.
- If the graphics card on the PC does not output analog RGB
and DVI simultaneously, connect only one of either RGB
Input or HDMI/DVI Input to display the PC on the set.
- If he graphics card on the PC does output analog RGB and DVI
simultaneously, the set to either RGB Input or HDMI/DVI Input;
(the other mode is set to Plug and Play automatically by the set.)
- Then, make the corresponding audio connections. If using a
sound card, adjust the PC sound as required.
- In this case, use another cable for audio. When PC (or
sound card of PC) have Analog Audio Output Connector,
RGB/DVI Audio Input of the set connect to Analog Audio
Cable (not supplied with the product). And then you can lis-
ten to normal Audio.
Reference
Cable sample (not supplied with the product)
How to use
1. Connect the HDMI/DVI Source Devices(DVD Player or Set
Top Box or PC) and the set.
2. Turn on the display by pressing the POWER button on the
set and HDMI/DVI Source Devices remote control.
3. Select HDMI/DVI Input source in Main Input option of
PIP/DW menu.
4. Check the image on your set. There may be noise associat-
ed with the resolution, vertical pattern, contrast or brightness
in HDMI/DVI Source Devices. If noise is present, change the
HDMI/DVI Source Devices to another resolution, change the
refresh rate or adjust the brightness and contrast on the
menu until the picture is clear. If the refresh rate of the PC
graphics card can not changed, change the PC graphics
card or consult the manufacturer of the PC graphics card.
Notes:
- Depending on the graphics card, DOS mode may not work if
you use a HDMI to DVI Cable.
- Avoid keeping a fixed image on the set screen for a long period
of time. The fixed image may become permanently imprinted on
the screen. Use the Orbiter screen saver when possible.
- When Source Devices are connected with HDMI/DVI Input,
output PC Resolution(VGA, SVGA, XGA), Position and Size
may not fit to Screen. As shown on page 29, press the
MENU button to adjust the screen Position of the set and
contact an PC graphics card service centre.
- When Source Devices connected HDMI/DVI Input output the set
Resolution(480p, 720p, 1080i), the set Display fit EIA/CEA-861-
B Specification to Screen. If not, refer to the Manual of
HDMI/DVI Source Devices or contact your service centre.
- In case HDMI/DVI Source Devices Cable is not connected
or poor cable connection, "No Signal" OSD display will
appear. And in case of Video Resolution not being supported
by the set output in HDMI/DVI Source Devices, "No Signal"
OSD display will appear. Refer to the Manual of HDMI/DVI
Source Devices or contact your service centre.
HDMI to DVI Cable
Analog Audio Cable
(RCA type)
Analog Audio Cable
(Stereo to RCA type)
HDMI Cable