LG Electronics 141K TX) Flat Panel Television User Manual


 
Owner’s Manual 25
Operation
ENGLISH
How to insert and eject the card
The JPEG Decoding/The Image Preview Supplied Spec
Compression Method
Baseline
Progressive
JPEG Decoding Support
Image Display
Preview Image Display
O
X
X
O O
Image
Image Image
Colour format
4:4:4
11:11:11 (Y, Cb, Cr)
4:2:2
21:11:11 (Y, C
b, Cr)
12:11:11 (Y, Cb, Cr)
4:2:0
22:11:11 (Y, C
b, Cr)
Display
when there is
no thumbnail.
Display
when there is
no thumbnail.
Display
when there is
no thumbnail.
W
W Inserting a Card
1. Insert the card into the Slot 1 and/or Slot 2 with the hand softly and slowly.
2. Press the button to enter the mode.
Press the button again to exit the mode.
W
W Ejecting a card
1. Press the M/C EJECT button on the remote control.
2. Press
DD
/
EE
button to Select the Memory 1 Eject or Memory 2 Eject
based on the inserted card location.
If selecting Cancel, OSD will disapear.
3. Carefully remove the card.
Notes:
• Screen saver will appear if you do not remove the card with the hand after operating the eject function.
• When entering the photo or music media at first, the M/C EJECT button will not work.
It’s possible to use the M/C EJECT button while using the photo or music media.
Caution: Press the M/C EJECT button on remote control before removing the memory card.
Failure to do so may damage the card.
invalid format invalid format
- If an error occurs when decoding the JPEG, “Corrupted file” is displayed on screen.
Memory 1 Eject
Memory 2 Eject
Cancel
1. Press
DD
/
EE
/
FF
/
GG
button to select photo or music for slot1/2.
2. Press the OK button to enter the photo or music media.
3. Press the button to exit the mode.
Notes:
The OSD of the ejected card slot is inactivate when ejecting the card.
If there is any error in a memory card, it’s impossible to enter mode.
Memory 1
Please select where to move
MS/Pro
Photo
Music
Memory 2
CF/MD
Photo
Music
Exit
- When you plug a memory card or press the button, the below screens will be displayed.
Select the Photo or Music Media
* In this manual, the OSD (On Screen Display) may be different from your set’s because it is just an
example to help you with the set operation.