LG Electronics 32/42/47LD7*** TV Antenna User Manual


 
81
TO USE A BLUETOOTH
NOTE
LG recommends the following headset mod-
els.
-Plantronics VOYAGER-855 / SONY HBH-
DS970, HBH-DS980 / Motorola S605
There might be an audio delay, depending on
the buf
fer memory size of the headset.
The stereo/mono headset officially certified
to be Bluetooth compatible can be searched
and connected.
The stereo/mono headset that supports the
A2DP or HSP function among the Bluetooth
devices can be connected.
If the surrounding environment of the TV is
as follows, the device may not be searched
or connected properly.
-If there is strong electromagnetic wave.
-If there are many Bluetooth devices.
-If the headset is turned off, not in place or
has an error.
-Because products such as microwave oven,
wireless LAN, plasma light, gas range etc.,
use the same frequency range, it can cause
communication error.
Only one Bluetooth headset can be connect-
ed at once.
Connection that is lost due to the TV being
turned off etc. will not be automatically recov-
ered. Try connecting the applicable device
again.
Some operations can be slower while operat-
ing the headset.
Even if you choose simplink Home Theater
after using the headset during Simplink opera-
tion, the unit will not automatically switch to
Home Theater speakers.
When the headset connection continuously
fails, pair the device one more time.
The audio quality of mono headsets will not be
as good as that for stereo headsets.
Mono headsets may suffer from noise as the
distance from the TV increases, because they
use a different transmission method compared
with stereo headsets.
When a Bluetooth headset is in use, the
Volume +/- and Mute keys do not work, and
the Audio menu returns to the default value
and is disabled.
With Bluetooth set to On, if any registered
devices are turned on, the TV will switch to
Bluetooth mode automatically even though you
are watching in another input mode. In this
case, set Bluetooth to Off.
When requesting to connect to TV from the Bluetooth headset
When the Bluetooth menu is "On" and there is a connection request
from the headset, this message is displayed.
Not all headsets support the this feature.(Refer to the user manual of
the applicable Bluetooth headset.)
Some headset types may make an attempt at connection when they
are turned off/on even though they are not included in the
Registered Device list.
Do you want to use your headset?
Yes No
1
Select Yes or No.
Downloaded From TV-Manual.com Manuals