LG Electronics 32LH30FR Flat Panel Television User Manual


 
BLUETOOTH
BLUETOOTH
66
Disconnecting the Bluetooth headset
Select
BBLLUUEETTOOOOTTHH
.
Select
BBlluueettooootthh HHeeaaddsseett
.
1
MENU
2
ENTER
Disconnect the Bluetooth headset.
ENTER
ENTER
3
NOTE
!
GG
LG recommends the following headset models.
-
Sony Ericsson : HBH-DS980, Motorola : S9,
Motorola : S605, Jabra : BT620S
GG
The stereo/mono headsets officially certified to be
Bluetooth compatible can be searched and connect-
ed.
GG
The stereo/mono headsets that support A2DP or HSP
functionality can be connected.
GG
If the surrounding environment of the TV is as fol-
lows, the device may not be searched or connected
properly.
-If there is strong electromagnetic interference.
-If there are many Bluetooth devices in the area.
-If the headset is turned off, not in place or has an
error.
-Because products such as microwave oven, wireless
LAN, plasma light, gas range etc., use the same fre-
quency range, they can cause communication errors.
GG
Only one Bluetooth device can be connected at a
time.
GG
Connection that is lost due to the TV being turned
off etc. will not be automatically recovered. Try con-
necting the applicable device again.
GG
Some operations can be slower while operating the
headset.
GG
Even if you choose simplink Home Theater after using
the headset during Simplink operation, the unit will
not automatically switch to Home Theater speakers.
GG
When the headset connection continuously fails, pair
the device one more time.
GG
The audio quality of mono headsets will not
be as good as that for stereo headsets.
GG
Mono headsets may suffer from noise as the dis-
tance from the TV increases, because they use a
different transmission method compared with
stereo headsets.
GG
When a Bluetooth headset is in use, the
Volume +/- and MUTE keys do not work, and
the Audio menu returns to the default value
and is disabled.
When requesting to connect to TV from the Bluetooth headset
When the Bluetooth menu is "On" and there is a connection request from
the headset, this message is dispalyed.
Not all headsets support this feature.(Refer to the user manual of the
applicable Bluetooth headset.)
No
Yes
Do you want to use your headset?
?
Select
YYeess
or
NNoo
.
1
ENTER
Even if it is not in the registered device list, depending on a headset, it works if connected as shown below
when headset power off.
MFL58486305-Edit2-en-blue22 5/29/09 1:11 PM Page 66