Filter
Top Products
16:9
Adjust the picture horizontally, in a linear pro-
portion to fill the entire screen.
Just Scan
Normally the edges of video signals are cropped
1-2%. Just Scan turns off this cropping and
shows the complete video.
Notes: If there is noise on the edges of the original
signal, it will be visible when Just Scan is activated.
JJuusstt SSccaann
operates only in
Component/HDMI/DVI(720p/1080i/1080p)
input source.
4:3
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio.
Zoom
Choose Zoom when you want to view the picture
without any alteration. However, the top and
bottom portions of the picture will be cropped.
■
When adjusting in Q.Menu menu,
a. or button: Adjust proportion of Zoom.
b. or button: Move the image on the screen.
Cinema Zoom1
Choose Cinema Zoom when you want to enlarge
the picture in correct proportion.
Note: When enlarging or reducing the pictrue,
the image may become distorted.
a. or button: Adjust proportion of Cinema
Zoom. The adjustment range is 1-16.
b. or button: Move the image on the screen.
PICTURE CONTROL
83
MFL58486305-Edit4-en 5/29/09 1:12 PM Page 83