Filter
Top Products
A-49
PREPARATION
■ Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,
the product can tilt forward after the product installation.) If you tighten the bolt with excessive force,
the bolt can deviate from abrasion of the tightening part of the bolt.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Set the Stand Base on even floor.
Assemble the parts of the Stand Body
with the Stand Base of the
TV.
Stand Body
Stand Base
M5x14
3
4
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in
the back of the TV.
M4x28
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Set the Stand Base on even floor.
Assemble the parts of the Stand Body
with the Stand Base of the TV.
Stand Body
Stand Base
M4x14
STAND INSTALLATION
4
5
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in
the back of the TV.
M4x28
Front
When assembling the stand,
make sure to distinguish and
assemble the front and rear
side of the stand correctly.
Only 50PK5
**
Only 50PK7
***
, 50PK9
***
, 50PX9
***
Assemble the parts of the Cable
Management Clip with the Stand Body.
3
Cable
Management
Clip
Stand Body
Downloaded From TV-Manual.com Manuals