Filter
Top Products
6 Appendix
Appendix 57
Appendix
6
About Magic Remote
Control
To re-register the Magic remote
control
Press the HOME ( ) and BACK (
1
) buttons at the
same time for about 5 seconds. The Magic remote
control will be unpaired with your unit.
y
Press the BACK (
1
) button while pointing
the remote control at the unit for 5 seconds
to reset and re-register it.
y
Set the speed and shape of the Magic
pointer that appears on the screen. Refer to
the setting the Magic pointer (page 30).
y
If the Magic pointer has not been used for
a certain period of time, it will disappear.
When the Magic pointer disappears from
the screen, shake the Magic remote control
to the right and left. Then, it appears again.
y
If you press the navigation button while
moving the Magic pointer on the screen,
the Magic pointer disappears, and the
Magic remote control works as a regular
remote control.
,
Note
y
Use within an eective distance of 33 ft. (10
meters). Using the Remote Control from
greater distances or when obstructions
block the sight line may cause malfunctions.
y
Electronic devices nearby may cause
communication interference. Devices such
as microwave oven and wireless LAN use
the same frequency range (2.4 GHz) as the
Magic remote control, which may interfere
with the remote control.
y
The Magic remote control may be broken if
dropped or damaged in any other way.
y
Do not drop or subject the Magic remote
control to heavy impacts.
>
Caution