LG Electronics DP280-N DVD Player User Manual


 
14
Connect the Automotive adapter
This unit and its automotive adapter are designed for use in vehi-
cles that have 8.5-16 volt, negative ground electrical systems.
(This is standard for most vehicles.) If your vehicle has a different
type of electrical system, the DC power system cannot be used.
a Connect the automotive adapter to the DC IN jack on
the unit.
b Connect the automotive adapter to the car’s cigarette lighter
socket.
Caution
To prevent electrical shock and possible damage to your unit or
vehicle, always unplug the automotive adapter from the cigarette
lighter socket before you remove the plug from your unit.
A 3 amp. 250V fuse for protection is installed in the automotive
adapter.
While the engine is being started, disconnect the automotive
adapter from the car’s cigarette lighter socket.
Do not operate your unit when the car battery is discharged.
Peak current from the car generator may cause the DC fuse to
blow.
If the vehicle’s supply voltage drops below approximately 10
volts, your unit may not work properly.
Do not leave your unit in a place where the temperature
exceeds 70°C (158°F), or the pick-up device may be damaged.
Examples include:
- Inside a car with the windows closed and in direct sunshine.
- Near a heating appliance.
Automotive adapter
This automotive adapter operates on DC 8.5-16V.
Contact an electrical parts distributor for assistance in selecting
a suitable automotive adapter.
Manufactured by WANLIDA Digital Technology Co., Ltd.
Power Connections (Continued)
Cigarette lighter socket
a
b