LG Electronics DP280-N DVD Player User Manual


 
18
1. Prepare the power supply.
2. Open the outer cover and press POWER button.
3.
Press OPEN to open the disc lid and insert a disc with the side
you want to play label up. Close the disc lid by hand.
If the disc is placed in upside down (and it is a single-sided disc),
“Check Disc” or “DISC ERROR” appears on the screen.
After playing back all of the chapters in the title, the unit automatically
stops and returns to the menu screen.
4. Press PLAY(N) to playback.
5. Adjust the volume.
NOTES
Place a disc with the playback side down on the spindle, and
push gently on the center of the disc so it goes into position.
If you are not using the LCD on this unit, select OFF to conserve
power.
The LCD is turned off if you close the unit.
The picture shown on the LCD depends on the display mode
and the size recorded on the disc.
A
Changing the size of the picture
Use the LCD MODE button to change the picture mode.
The mode is shown on the unit’s display as follows.
NORMAL → 4:3 mode OFF
NOTE
May appear to differ according to kind of disc.
Select a MODE
Selects a mode among DISC, AV IN or USB.
1. Press MODE button on the unit.
The mode selection menu appears on the screen.
2. Use b / B to select the mode then press ENTER.
DISC: The disc menu or playback picture for the disc appears
on the screen .
AV IN: A picture from external device appears on the screen.
USB: A file or folder list in USB Flash Drive appears on the
screen.
Playing a Disc