Filter
Top Products
13
Connecting a PAY-TV/Canal Plus Decoder
You can watch or record PAY-TV/Canal Plus programmes if you connect a
decoder (not supplied) to the unit. Disconnect the unit’s mains lead from the
mains when connecting the decoder. You do not need to turn on the unit to view
the signals from the connected tuner on your TV.
To watch or record PAY-TV/Canal
Plus programmes, set [AV2
Connection] option to [Decoder] (see
page 18) and set the program’s
[CANAL] option to [On] on the Setup
menu (page 15).
If you disconnect the unit’s mains
lead, you will not be able to view the
signals from the connected decoder.
Connecting to the AV2 DECODER jack
Connect a VCR or similar recording device to the AV2 DECODER jack of this
unit. You do not need to turn on the unit to view the signals from the connected
tuner on your TV.
To watch or record the source from
AV2 DECODER jack, set [AV2
Connection] option to [Others] (see
page 18) and set [AV2 Recording]
option to [Auto], [CVBS], [RGB] or
[S-Video] as required (see page 21).
Pictures containing copy protection signals that prohibit any copying cannot
be recorded.
If you pass the unit signals via the VCR, you may not receive a clear image
on your TV screen.
Be sure to connect your VCR to the unit and your TV in the order shown
below. To watch video tapes, watch the tapes through a second line input on
your TV.
When you record to a VCR from this unit, do not switch the input source to
TV by pressing the TV/DVD button on the remote.
If you are using a B Sky B tuner, be sure to connect the tuner’s VCR SCART
jack to the AV2 DECODER jack.
If you disconnect the unit’s mains lead, you will not be able to view the sig-
nals from the connected VCR or tuner.
SCART AV
DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 13