Filter
Top Products
21
TV Record Audio – Select an audio channel to record when recording a bilin-
gual program.
[Main+Sub]: Main language and sub language
[Main]: Main language only
[Sub]: Sub language only
Auto Chapter – When recording, chapter markers are added automatically in
every specified interval (5, 10 or 15 min.).
AV2 Recording – Selects a method of inputting video signals for the
AV2(DECODER) jack. The picture will not be clear if this setting does not match
the type of the video input signal.
[Auto]: The video input signal will automatically follow the video signal
received.
[CVBS]: Inputs CVBS(composite) video signals.
[RGB]: Inputs RGB signals.
[S-VIDEO]: Inputs S-Video signals.
Adjust the disc settings
Disc Format – You can Initialize a DVD by pressing OK( ) while [Start] is
selected. The [Disc Format] menu appears. The unit starts formatting after
confirmation. You can select a mode between VR and Video for DVD-RW discs.
Everything recorded on the DVD will be erased after formatting.
If you load a completely blank disc, the unit will initialize the disc automatically.
See “Formatting mode (new disc)” on page 5 for more information.
Finalize – Finalizing is necessary when you wish to playback a DVD which you
have made in order for it to work with another DVD player. How long finalization
takes depends on the disc condition, recorded length and number of titles.
[Finalize]: The [Finalize] menu appears. The unit starts finalizing after
confirmation.
[Unfinalize]: The finalized DVD-RW discs can be unfinalized after confirming
on the [Unfinalize] menu. After unfinalizing, the disc can be edited and re-
record.
Before finalizing, check the characteristics between the disc type in the table
below.
The finalized DVD-RW discs can be unfinalized
so that the disc can edit or record again.
Once you finalize a disc, you can not edit or
record anything on the disc.
Discs are automatically finalized when removed from
the unit.
The finalization is not required.
Disc Label – This function allows you to change the default disc name to some-
thing more descriptive. This name appears when you load a disc and display
disc information on-screen. The keyboard menu appears by pressing OK( )
while [Edit] is selected.
Disc Protect – This function allows you to protect discs from accidental
recording, erasure and editing by setting this option to [ON]. The DVD-R and
Video mode DVD-RW are not available to protect.
RAM
+RW
-R+R
-RW
DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 21