Filter
Top Products
18 Plasma TV
Operation
On-screen Menus Language Selection
On-screen Menus Language Selection
T
T
urning the TV On
urning the TV On
Turning on the TV just after installation
Turning on the TV (power cord is still connected)
1. Connect power cord correctly.
2. Press the button on the TV. At this moment, the TV is switched to standby mode. Press the
TV/VIDEO , CH (
D
/
E
) button on the TV or press the POWER, TV/VIDEO, COMP/RGB/DVI,
CH (+
,
-), Number (0 ~ 9) button on the remote control and then the TV will switch on.
• Press the button on the TV to turn the TV on.
1. If the TV was turned off with the button on the TV
2. If the TV was turned off with the remote control and then the button on the TV
• Press the button on the TV and then press the POWER, TV/VIDEO, COMP/RGB/DVI, CH (+
,
-),
Number (0 ~ 9) button on the remote control to turn the TV on.
- The menus will be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use
D
/
E
button to select the OPTION menu.
2. Press the G button and then use
D
/
E
button to select Language.
3. Press the G button and then use
D
/
E
button to select your desired language.
From this point on, the on-screen menus will be shown in the selected language.
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
NOTE
• If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
* In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just example to help
the TV operation.