Filter
Top Products
Installation
!nstaL!ation
Installation Instructions
The TV can be installed in various ways such as on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally. The speakers shown are optional.
It is recommended that RU-42/50PX10/10C/11/11C model only be used at an altitude of less than 3281 feet (lO00m) to get the
best quality picture and sound.
It is recommended that RU-42/50PX10H/11H model only be used at an altitude of less than 6561 feet (200Ore) to get the best
quality picture and sound.
GROUNDING
Ensure that you connect the grounding / earth wire to prevent possible
electric shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not try to ground the
unit by connecting it to telephone wires, lightening rods, or gas pipes.
Power
Supply
Short-circuit
Breaker
Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer
where you purchased the product.
[
....................................J
Owner's Manual Batteries Remote Control Power Cord
2-TV brackets
2-Wall brackets
2-TV bracket bolts
Secure the set assembly by joining it to a wall by using the TV/VVall brackets.
Here shown may be somewhat different from your TV.
/
\
If the set will be mounted on a desk top, insert the 2-
TV bracket bolts with 2-TV brackets and tighten them
securely in the upper holes as shown.
Install the wall brackets on the wall with bolts, (not sup-
plied with the product), as shown.
Match the height of the TV brackets and the wall brackets.
Check to be sure the brackets are tightened securely.
Secure the TV assembly to the wall with strong strings
or wire cables, (not supplied with the product), as
shown.
10 Plasma TV