Filter
Top Products
ExternalControlDeviceSetup
09. Color (Command2:i)
To adjust the screen color.
You can also adjust color in the Picture menu.
Transmission
[[k][i][ ][Set IU][ ][Uata][Cr] 1
Data Min:O-Max:64
®Refer to 'Real data mapping 1'. See page 35.
Acknowledqement
[i_ ][Set ID][ ][OK][Data][x] 1
10. Tint (Command2:j)
I_ To adjust the screen tint.
You can also adjust tint in the Picture menu.
Transmission
I[k][j][ ][Set ID][ ][Data][Cr] I
Data Red:O-Green:64
®Refer to 'Real data mapping 1'. See page 35.
Acknowledgement
][Set ID][ ][OK][Data][x] 1
11. Sharpness (Command2:k)
I_ To adjust the screen sharpness.
You can also adjust sharpness in the Picture menu.
Transmission
I[k][k][ ][Set ID][ ][Data][Cr] i
Data Min: 0 _ Max: 64
® Refer to 'Real data mapping 1'. See page 35.
Acknowledqement
i[k][ ][Set ID][ ][OK][Data][x] 1
12. OSD Select (Command2:l)
I_ To select OSD (On Screen Display) on/off.
Transmission
[[k][I][ ][Set ID][ ][Data][Cr] i
Data O: OSD off 1: OSD on
Acknowledqement
[[I][ ][Set IU][ ][OK][Uata][x] ]
13. Remote Control Lock Mode (Command2:m)
I_ To lock the remote control and the front panel controls on
the monitor.
Transmission
I[k][m][ ][Set ID][ ][Data][Cr] i
Data O: Lock off 1: Lock on
Acknowledqement
i[m][ ][Set ID][ ][OK][Data][x] i
® If you're not using the remote control and front panel controls
on the monitor, use this mode. When main power is on/off,
remote control lock is released.
14. PIP / DW (Command2:n)
To control the PIP (Picture In picture)/DW (Double Window).
You can also control the PIP/DW using the PIP/DW button
on the remote control or in the PIP/DW menu.
Transmission
I[k][n][ ][Set IU][ ][Uata][Cr] I
Data O: PIP/DW off 2: DWl
1: PIP 3:DW2
Acknowledgement
i[n][ ][Set IU][ ][OK][Uata][x] i
15. Split Zoom (Command2:p)
I_ To operate split zoom function and select the split
zoom section number.
Transmission
i[k][p][ ][Set ID][ ][Data][Cr] ]
Data Min: 0 - Max:99
® Refer to 'Real data mapping 2'.
Acknowledgement
I[p][ ][Set ID][ ][OK][Data][x] 1
Real data mapping 2
0 : Reset split zoom
21 : Selection 1 of 2 split zoom
24: Selection 4 of 2 split zoom
41 : Selection 1 of 4 split zoom
42: Selection 2 of 4 split zoom
44: Selection 4 of 4 split zoom
45: Selection 5 of 4 split zoom
91 : Selection 1 of 9 split zoom
99: Selection 9 of 9 split zoom
16. PIP Position (Command2:q)
I_ To select sub picture position for PIP.
You can also adjust the sub picture position using
WIN.POSITION on the remote control or in the PIP/DW menu.
Transmission
I[k][q][ ][Set ID][ ][Data][Cr]
Data O: Right down on screen
1: Left down on screen
2: Left up on screen
3: Right up on screen
Acknowledqement
I[q][ ][Set ID][ ][OK][Data][x]
L
17. Treble (Command2:r)
I_ To adjust treble.
You can also adjust treble in the Sound menu.
Transmission
I[k][r][ ][Set ID][ ][Data][Cr] 1
Data Min: 0 _ Max: 64
® Refer to 'Real data mapping 1'. See page 35.
Acknowledgement
I[r][ ][Set ID][ ][OK][Data][x] I
36 Plasma TV