Filter
Top Products
ExternalControlDeviceSetup
26. ISM Method (Command2:p)
To avoid havinga fixed imageremain on screen.
Transmission
[[j][p][ ][Set Ia][ ][Uata][Cr] ]
Data O: Normal 2: Orbiter
1: White wash 3: Inversion
Acknowledgement
i[p] [ ][Set IU][ ][OK][Uata][x] 1
27. Low Power (Command2:q)
To control the low power function on/off.
Transmission
[[j][q][ ][Set ID][ ][Data][Cr] ]
Data O: Low power off
1: Low power on
Acknowledgement
i[q] [ ][Set IU][ ][OK][Uata][x] 1
28. Orbiter Time Setting (Command2:r)
To adjust orbiter operation time term.
Transmission
_][r][ ][Set ID][ ][Data][Cr] i
Data Min: 1 - Max: FE
Acknowledqement
i[r][ ][Set IU][ ][OK][Uata][x] i
29. Orbiter Pixel Setting (Command2:s)
I_ To adjust pixei number in orbiter function.
Transmission
[_][s][ ][Set IU][ ][Uata][Cr] 1
Data Min:l -Max:9
Acknowledqement
[_ ][Set IU][ ][OK][Uata][x] 1
30. Picture Size Setting for Double Window
mode (Command2:t)
To adjust main window size in Double Window mode.
Transmission
I[j][t][ ][Set IU][ ][Uata][Cr] I
Data Min: 0 _ Max: 14
®Refer to 'Real data mapping1'. See page 35.
Acknowledgement
[_ ][Set ID][ ][OK][Data][x] 1
38 Plasma TV
31. Auto Configure (Command2:u)
I_ To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
_][u][ ][Set IU][ ][Uata][Cr] 1
Data 1: To set
Acknowledqement
i[u][ ][Set IU][ ][OK][Uata][x] ]
32. Tune command (Command: m a)
I_ Tune channel to following physical number
Transmission
i[m][a][ ][Set ID][ ][DataO][ ][Data1][ ][Data2][ ][Data3][Cr]
Data O: Air: 02 _ 45, Cable: 01, OE _ 7D
1:0
2:0
3: High -_ Main Channel: O, Sub Channel: 1
Low -_ Air: O, CATV: 1
Acknowledgement
i[a][ ][Set IU][ ][OK][UataO][ ][Data1][ ][Data2][ ][Uatag][x] i
33. Channel Add/Del (Command: m b)
To add and delete the channels
Transmission
I[m][b][ ][Set IU][ ][Uata][Cr] I
Data O: Channel Memory
1: Channel Erase
Acknowledqement
[[b][ ][Set IU][ ][OK][Uata][x] ]
34. Key (Command: m c)
To send IR remote key code
Transmission
i[m][c][ ][Set ID][ ][Data][Cr]
Data Key code: Refer to page 40.
Acknowledgement
i[c][ ][Set ID][ ][OK][Data][x]