Filter
Top Products
19
To Add or Erase Channels from Memory
This feature allows you to add or erase channels
from memory manually.
1. Select the [Ch. Edit] option.
2. Press B to move to the third level.
[Edit] icon is highlighted.
3. Press ENTER and the Channel Edit menu
appears.
4. Use v / V or number buttons to select a channel
then press B.
5. Use v / V to tunes the channel to obtain a clear
picture.
6. Press B .
[Add] or [Delete] icon is highlighted.
7. Press ENTER to confirm your setting.
8. Repeat steps 4-7 to add or erase additional
channels.
9. Press RETURN (O) to exit the menu.
Clock Set
1. Select the [Clock Set] option.
2. Press B to move to the third level.
Auto
The Auto option is set at the factory. In the Auto option,
the Recorder looks for a channel carrying XDS
(Extended Data Services) information. XDS updates the
clock using the Coordinated Universal Time.
1. Use b/B to choose the option and use v/V to
change the setting.
[Band] Select the band.
[PBS Ch.] Select the channel.
[Time Zone] Choose your time zone.
When Timezone is set to Auto, the Recorder
will use XDS information to determine the prop-
er setting.
[Daylight Savings] Choose the Daylight Savings.
When it is set to Auto, the Recorder will use
XDS information to determine the proper set-
ting.
2. Press ENTER to confirm your setting.
Note :
The Auto Clock Feature enables the Recorder to set up
the clock when the Recorder is turned off.
Manual
If your local TV station does not send date and time
information, or sends incorrect information, you can set
the clock manually.
1. Enter the necessary information for year, date and
time.
b / B (left/right): Moves the cursor to the previous
or next column.
v / V (up/down): Changes the setting at the current
cursor position.
2. Press ENTER to confirm your setting.
3. Press SETUP to exit the Setup menu.
Hookup and
Settings