Filter
Top Products
40
Timer Recording Troubleshooting
Even though the timer is set, the recorder will not
record when:
• There is no disc loaded.
•Anon-recordable disc is loaded.
• [Disc Protect] is set to [ON] in the Disc menu
(see page 26).
• There are already 99 titles (DVD-RW, DVD-R)
or 49 titles (DVD+RW, DVD+R(DL)) recorded
on the disc.
You cannot enter a timer program when:
•Arecording is already underway.
• The time you’re trying to set has already
passed.
• There are already 8 timer programs set.
If two or more timer programs overlap:
• The earlier program takes priority.
• When the earlier program finishes, the later
program starts.
• If two programs are set to start at exactly the
same time, the program entered first takes pri-
ority.
If the disc is damaged, the recording may not com-
plete successfully. In this case even though the
Check field shows [Rec. OK], it may not be.
Recording from External
Recording from External
Components
Components
You can record from an external component, such as
a camcorder or VCR, connected to any of the
Recorder’s external inputs.
1. Make sure that the component you want to record
from is connected properly to the Recorder. See
page 17.
2. Press INPUT repeatedly to select the external
input to record from.
•AV1: Audio/Video Input mounted on back
panel.
•AV2: Audio/Video Input mounted on front
panel.
•DV: DV Input mounted on front panel.
3. Load a recordable disc or tape.
4. Set a recording mode as necessary by pressing
REC MODE repeatedly (HQ, SQ, LQ, EQ).
5. Press z REC once to start recording.
The REC indicator lights in the display window.
6. Press STOP (x) to stop recording.
Notes:
• Check that the Audio In settings [DV Recording
Audio] are as you want them. See page 24.
• If your source is copy-protected using CopyGuard,
you will not be able to record it using this recorder.
See Copyright on page 9 for more details.
•
Recording continues until you press STOP (x) or
the disc is full.
• To record for a fixed length of time, see Instant
Timer Recording on page 38.